From f5c4671bfbad96bf346bd7e9a21fc4317b4959df Mon Sep 17 00:00:00 2001 From: Indrajith K L Date: Sat, 3 Dec 2022 17:00:20 +0530 Subject: Adds most of the tools --- coreutils-5.3.0-bin/man/cat1p/kill.1p.txt | 365 ++++++++++++++++++++++++++++++ 1 file changed, 365 insertions(+) create mode 100644 coreutils-5.3.0-bin/man/cat1p/kill.1p.txt (limited to 'coreutils-5.3.0-bin/man/cat1p/kill.1p.txt') diff --git a/coreutils-5.3.0-bin/man/cat1p/kill.1p.txt b/coreutils-5.3.0-bin/man/cat1p/kill.1p.txt new file mode 100644 index 0000000..4a26aec --- /dev/null +++ b/coreutils-5.3.0-bin/man/cat1p/kill.1p.txt @@ -0,0 +1,365 @@ +kill(P) kill(P) + + + + + +NAME + kill - terminate or signal processes + +SYNOPSIS + kill -s signal_name pid ... + + kill -l [exit_status] + + + + kill [-signal_name] pid ... + + kill [-signal_number] pid ... + + +DESCRIPTION + The kill utility shall send a signal to the process or + processes specified by each pid operand. + + For each pid operand, the kill utility shall perform + actions equivalent to the kill() function defined in the + System Interfaces volume of IEEE Std 1003.1-2001 called + with the following arguments: + + The value of the pid operand shall be used as the + pid argument. + + The sig argument is the value specified by the -s + option, - signal_number option, or the - sig- + nal_name option, or by SIGTERM, if none of these + options is specified. + +OPTIONS + The kill utility shall conform to the Base Definitions + volume of IEEE Std 1003.1-2001, Section 12.2, Utility + Syntax Guidelines, except that in the last two SYNOPSIS + forms, the - signal_number and - signal_name options are + usually more than a single character. + + The following options shall be supported: + + -l (The letter ell.) Write all values of signal_name + supported by the implementation, if no operand is + given. If an exit_status operand is given and it + is a value of the '?' shell special parameter + (see Special Parameters and wait() ) correspond- + ing to a process that was terminated by a signal, + the signal_name corresponding to the signal that + terminated the process shall be written. If an + exit_status operand is given and it is the + unsigned decimal integer value of a signal num- + ber, the signal_name (the symbolic constant name + without the SIG prefix defined in the Base Defi- + nitions volume of IEEE Std 1003.1-2001) corre- + sponding to that signal shall be written. Other- + wise, the results are unspecified. + + -s signal_name + + Specify the signal to send, using one of the sym- + bolic names defined in the header. + Values of signal_name shall be recognized in a + case-independent fashion, without the SIG prefix. + In addition, the symbolic name 0 shall be + recognized, representing the signal value zero. + The corresponding signal shall be sent instead of + SIGTERM. + + -signal_name + + Equivalent to -s signal_name. + + -signal_number + + Specify a non-negative decimal integer, sig- + nal_number, representing the signal to be used + instead of SIGTERM, as the sig argument in the + effective call to kill(). The correspondence + between integer values and the sig value used is + shown in the following table. + + The effects of specifying any signal_number other than + those listed in the table are undefined. + + + signal_number sig Value + 0 0 + 1 SIGHUP + 2 SIGINT + 3 SIGQUIT + 6 SIGABRT + 9 SIGKILL + 14 SIGALRM + 15 SIGTERM + + If the first argument is a negative integer, it shall be + interpreted as a - signal_number option, not as a nega- + tive pid operand specifying a process group. + +OPERANDS + The following operands shall be supported: + + pid One of the following: + + A decimal integer specifying a process or process group + to be signaled. The process or processes selected by + positive, negative, and zero values of the pid operand + shall be as described for the kill() function. If + process number 0 is specified, all processes in the cur- + rent process group shall be signaled. For the effects of + negative pid numbers, see the kill() function defined in + the System Interfaces volume of IEEE Std 1003.1-2001. If + the first pid operand is negative, it should be preceded + by "--" to keep it from being interpreted as an option. + + A job control job ID (see the Base Definitions volume of + IEEE Std 1003.1-2001, Section 3.203, Job Control Job ID) + that identifies a background process group to be sig- + naled. The job control job ID notation is applicable + only for invocations of kill in the current shell execu- + tion environment; see Shell Execution Environment . + + exit_status + A decimal integer specifying a signal number or + the exit status of a process terminated by a sig- + nal. + + +STDIN + Not used. + +INPUT FILES + None. + +ENVIRONMENT VARIABLES + The following environment variables shall affect the + execution of kill: + + LANG Provide a default value for the internationaliza- + tion variables that are unset or null. (See the + Base Definitions volume of IEEE Std 1003.1-2001, + Section 8.2, Internationalization Variables for + the precedence of internationalization variables + used to determine the values of locale cate- + gories.) + + LC_ALL If set to a non-empty string value, override the + values of all the other internationalization + variables. + + LC_CTYPE + Determine the locale for the interpretation of + sequences of bytes of text data as characters + (for example, single-byte as opposed to multi- + byte characters in arguments). + + LC_MESSAGES + Determine the locale that should be used to + affect the format and contents of diagnostic mes- + sages written to standard error. + + NLSPATH + Determine the location of message catalogs for + the processing of LC_MESSAGES . + + +ASYNCHRONOUS EVENTS + Default. + +STDOUT + When the -l option is not specified, the standard output + shall not be used. + + When the -l option is specified, the symbolic name of + each signal shall be written in the following format: + + + "%s%c", , + + where the is in uppercase, without the SIG + prefix, and the shall be either a + or a . For the last signal written, + shall be a . + + When both the -l option and exit_status operand are + specified, the symbolic name of the corresponding signal + shall be written in the following format: + + + "%s\n", + +STDERR + The standard error shall be used only for diagnostic + messages. + +OUTPUT FILES + None. + +EXTENDED DESCRIPTION + None. + +EXIT STATUS + The following exit values shall be returned: + + 0 At least one matching process was found for each + pid operand, and the specified signal was suc- + cessfully processed for at least one matching + process. + + >0 An error occurred. + + +CONSEQUENCES OF ERRORS + Default. + + The following sections are informative. + +APPLICATION USAGE + Process numbers can be found by using ps. + + The job control job ID notation is not required to work + as expected when kill is operating in its own utility + execution environment. In either of the following exam- + ples: + + + nohup kill %1 & + system("kill %1"); + + the kill operates in a different environment and does + not share the shell's understanding of job numbers. + +EXAMPLES + Any of the commands: + + + kill -9 100 -165 + kill -s kill 100 -165 + kill -s KILL 100 -165 + + sends the SIGKILL signal to the process whose process ID + is 100 and to all processes whose process group ID is + 165, assuming the sending process has permission to send + that signal to the specified processes, and that they + exist. + + The System Interfaces volume of IEEE Std 1003.1-2001 and + this volume of IEEE Std 1003.1-2001 do not require spe- + cific signal numbers for any signal_names. Even the - + signal_number option provides symbolic (although + numeric) names for signals. If a process is terminated + by a signal, its exit status indicates the signal that + killed it, but the exact values are not specified. The + kill -l option, however, can be used to map decimal sig- + nal numbers and exit status values into the name of a + signal. The following example reports the status of a + terminated job: + + + job + stat=$? + if [ $stat -eq 0 ] + then + echo job completed successfully. + elif [ $stat -gt 128 ] + then + echo job terminated by signal SIG$(kill -l $stat). + else + echo job terminated with error code $stat. + fi + + To send the default signal to a process group (say 123), + an application should use a command similar to one of + the following: + + + kill -TERM -123 + kill -- -123 + +RATIONALE + The -l option originated from the C shell, and is also + implemented in the KornShell. The C shell output can + consist of multiple output lines because the signal + names do not always fit on a single line on some termi- + nal screens. The KornShell output also included the + implementation-defined signal numbers and was considered + by the standard developers to be too difficult for + scripts to parse conveniently. The specified output for- + mat is intended not only to accommodate the historical C + shell output, but also to permit an entirely vertical or + entirely horizontal listing on systems for which this is + appropriate. + + An early proposal invented the name SIGNULL as a sig- + nal_name for signal 0 (used by the System Interfaces + volume of IEEE Std 1003.1-2001 to test for the existence + of a process without sending it a signal). Since the + signal_name 0 can be used in this case unambiguously, + SIGNULL has been removed. + + An early proposal also required symbolic signal_names to + be recognized with or without the SIG prefix. Historical + versions of kill have not written the SIG prefix for the + -l option and have not recognized the SIG prefix on sig- + nal_names. Since neither applications portability nor + ease-of-use would be improved by requiring this exten- + sion, it is no longer required. + + To avoid an ambiguity of an initial negative number + argument specifying either a signal number or a process + group, IEEE Std 1003.1-2001 mandates that it is always + considered the former by implementations that support + the XSI option. It also requires that conforming appli- + cations always use the "--" options terminator argument + when specifying a process group, unless an option is + also specified. + + The -s option was added in response to international + interest in providing some form of kill that meets the + Utility Syntax Guidelines. + + The job control job ID notation is not required to work + as expected when kill is operating in its own utility + execution environment. In either of the following exam- + ples: + + + nohup kill %1 & + system("kill %1"); + + the kill operates in a different environment and does + not understand how the shell has managed its job num- + bers. + +FUTURE DIRECTIONS + None. + +SEE ALSO + Shell Command Language , ps , wait() , the System Inter- + faces volume of IEEE Std 1003.1-2001, kill(), the Base + Definitions volume of IEEE Std 1003.1-2001, + +COPYRIGHT + Portions of this text are reprinted and reproduced in + electronic form from IEEE Std 1003.1, 2003 Edition, + Standard for Information Technology -- Portable Operat- + ing System Interface (POSIX), The Open Group Base Speci- + fications Issue 6, Copyright (C) 2001-2003 by the Insti- + tute of Electrical and Electronics Engineers, Inc and + The Open Group. In the event of any discrepancy between + this version and the original IEEE and The Open Group + Standard, the original IEEE and The Open Group Standard + is the referee document. The original Standard can be + obtained online at http://www.open- + group.org/unix/online.html . + + + +POSIX 2003 kill(P) -- cgit v1.2.3