Adds most of the toolsHEADmaster

1 files changed, 287 insertions, 0 deletions

diff --git a/coreutils-5.3.0-bin/man/cat1p/df.1p.txt b/coreutils-5.3.0-bin/man/cat1p/df.1p.txt
new file mode 100644
index 0000000..9b4c14f
--- /dev/null
+++ b/coreutils-5.3.0-bin/man/cat1p/df.1p.txt
@@ -0,0 +1,287 @@
+df(P)                                                     df(P)
+
+
+
+
+
+NAME
+       df - report free disk space
+
+SYNOPSIS
+       df  [-k][-P|-t][file...]<img src="../images/opt-end.gif"
+       alt="[Option End]" border="0">
+
+DESCRIPTION
+       The df utility shall write the amount of available space
+       <img  src="../images/opt-start.gif" alt="[Option Start]"
+       border="0">  and file slots  for file systems  on  which
+       the invoking user has appropriate read access. File sys-
+       tems shall be specified by the file operands; when  none
+       are specified, information shall be written for all file
+       systems. The format of the default  output  from  df  is
+       unspecified,  but  all  space  figures  are  reported in
+       512-byte units, unless the -k option is specified.  This
+       output  shall  contain  at  least the file system names,
+       amount of available space on each of these file systems,
+        and  the  number  of free file slots, or inodes, avail-
+       able; when -t is specified, the output shall contain the
+       total allocated space as well.
+
+OPTIONS
+       The  df  utility  shall  conform to the Base Definitions
+       volume of IEEE Std 1003.1-2001,  Section  12.2,  Utility
+       Syntax Guidelines.
+
+       The following options shall be supported:
+
+       -k     Use  1024-byte  units,  instead  of  the  default
+              512-byte units, when writing space figures.
+
+       -P     Produce output in the  format  described  in  the
+              STDOUT section.
+
+       -t     Include total allocated-space figures in the out-
+              put.
+
+
+OPERANDS
+       The following operand shall be supported:
+
+       file   A pathname of a file within the hierarchy of  the
+              desired  file  system.   If  a  file other than a
+              FIFO, a regular file, a directory,  or a  special
+              file  representing the device containing the file
+              system (for example, /dev/dsk/0s1)  is specified,
+              the results are unspecified.  Otherwise, df shall
+              write the amount of free space in the file system
+              containing the specified file operand.
+
+
+STDIN
+       Not used.
+
+INPUT FILES
+       None.
+
+ENVIRONMENT VARIABLES
+       The  following  environment  variables  shall affect the
+       execution of df:
+
+       LANG   Provide    a    default     value     for     the
+              internationalization  variables that are unset or
+              null.  (See  the  Base  Definitions   volume   of
+              IEEE Std 1003.1-2001, Section 8.2, International-
+              ization Variables for the precedence of  interna-
+              tionalization  variables  used  to  determine the
+              values of locale categories.)
+
+       LC_ALL If set to a non-empty string value, override  the
+              values  of  all  the  other  internationalization
+              variables.
+
+       LC_CTYPE
+              Determine the locale for  the  interpretation  of
+              sequences  of  bytes  of  text data as characters
+              (for example, single-byte as  opposed  to  multi-
+              byte characters in arguments).
+
+       LC_MESSAGES
+              Determine  the  locale  that  should  be  used to
+              affect the format and contents of diagnostic mes-
+              sages  written  to standard error and informative
+              messages written to standard output.
+
+       NLSPATH
+              Determine the location of  message  catalogs  for
+              the processing of LC_MESSAGES .
+
+
+ASYNCHRONOUS EVENTS
+       Default.
+
+STDOUT
+       When  both the -k and -P options are specified, the fol-
+       lowing header  line  shall  be  written  (in  the  POSIX
+       locale):
+
+
+              "Filesystem 1024-blocks Used Available Capacity Mounted on\n"
+
+       When  the  -P option is specified without the -k option,
+       the following header line shall be written (in the POSIX
+       locale):
+
+
+              "Filesystem 512-blocks Used Available Capacity Mounted on\n"
+
+       The  implementation may adjust the spacing of the header
+       line and the individual data lines so that the  informa-
+       tion is presented in orderly columns.
+
+       The  remaining  output with -P shall consist of one line
+       of information for each  specified  file  system.  These
+       lines shall be formatted as follows:
+
+
+              "%s %d %d %d %d%% %s\n", <file system name>, <total space>,
+                  <space used>, <space free>, <percentage used>,
+                  <file system root>
+
+       In  the  following  list,  all  quantities  expressed in
+       512-byte units (1024-byte when -k is specified) shall be
+       rounded up to the next higher unit. The fields are:
+
+       <file system name>
+
+              The  name  of  the file system, in an implementa-
+              tion-defined format.
+
+       <total space>
+              The total size of the  file  system  in  512-byte
+              units. The exact meaning of this figure is imple-
+              mentation-defined,     but     should     include
+              <space used>,   <space free>,   plus   any  space
+              reserved by the system not normally available  to
+              a user.
+
+       <space used>
+              The  total  amount of space allocated to existing
+              files in the file system, in 512-byte units.
+
+       <space free>
+              The total amount of space  available  within  the
+              file  system  for  the  creation  of new files by
+              unprivileged users, in 512-byte units. When  this
+              figure  is  less  than or equal to zero, it shall
+              not be possible to create any new  files  on  the
+              file system without first deleting others, unless
+              the process has appropriate privileges.  The fig-
+              ure written may be less than zero.
+
+       <percentage used>
+
+              The  percentage  of  the normally available space
+              that is currently allocated to all files  on  the
+              file  system.  This shall be calculated using the
+              fraction:
+
+
+              <space used>/( <space used>+ <space free>)
+
+       expressed  as  a  percentage.  This  percentage  may  be
+       greater  than 100 if <space free> is less than zero. The
+       percentage value shall be expressed as a positive  inte-
+       ger, with any fractional result causing it to be rounded
+       to the next highest integer.
+
+       <file system root>
+
+              The directory below which the file system hierar-
+              chy appears.
+
+
+       The output format is unspecified when -t is used.
+
+STDERR
+       The  standard  error  shall  be used only for diagnostic
+       messages.
+
+OUTPUT FILES
+       None.
+
+EXTENDED DESCRIPTION
+       None.
+
+EXIT STATUS
+       The following exit values shall be returned:
+
+        0     Successful completion.
+
+       >0     An error occurred.
+
+
+CONSEQUENCES OF ERRORS
+       Default.
+
+       The following sections are informative.
+
+APPLICATION USAGE
+       On most systems, the "name of the  file  system,  in  an
+       implementation-defined  format"  is  the special file on
+       which the file system is mounted.
+
+       On large file systems,  the  calculation  specified  for
+       percentage used can create huge rounding errors.
+
+EXAMPLES
+       The  following example writes portable information about
+       the /usr file system:
+
+
+              df -P /usr
+
+       Assuming that /usr/src is part of the /usr file  system,
+       the  following  produces the same output as the previous
+       example:
+
+
+              df -P /usr/src
+
+RATIONALE
+       The behavior of df with the -P  option  is  the  default
+       action  of  the 4.2 BSD df utility. The uppercase -P was
+       selected to avoid collision with a known industry exten-
+       sion using -p.
+
+       Historical df implementations vary considerably in their
+       default output. It was therefore necessary  to  describe
+       the  default output in a loose manner to accommodate all
+       known historical implementations and to add  a  portable
+       option  (  -P) to provide information in a portable for-
+       mat.
+
+       The use of 512-byte units  is  historical  practice  and
+       maintains  compatibility  with ls and other utilities in
+       this volume of IEEE Std 1003.1-2001. This does not  man-
+       date  that  the  file system itself be based on 512-byte
+       blocks. The -k option was added as a compromise measure.
+       It  was agreed by the standard developers that 512 bytes
+       was the best default unit because of its  complete  his-
+       torical  consistency  on  System  V  (versus  the  mixed
+       512/1024-byte usage on  BSD  systems),  and  that  a  -k
+       option  to  switch to 1024-byte units was a good compro-
+       mise. Users who prefer the more logical 1024-byte  quan-
+       tity  can easily alias df to df -k without breaking many
+       historical scripts relying on the 512-byte units.
+
+       It was suggested that df and the various related  utili-
+       ties be modified to access a BLOCKSIZE environment vari-
+       able to achieve consistency and user  acceptance.  Since
+       this  is  not  historical  practice on any system, it is
+       left as a possible area for system extensions  and  will
+       be  re-evaluated  in  a  future  version if it is widely
+       implemented.
+
+FUTURE DIRECTIONS
+       None.
+
+SEE ALSO
+       find
+
+COPYRIGHT
+       Portions of this text are reprinted  and  reproduced  in
+       electronic  form  from  IEEE  Std  1003.1, 2003 Edition,
+       Standard for Information Technology -- Portable  Operat-
+       ing System Interface (POSIX), The Open Group Base Speci-
+       fications Issue 6, Copyright (C) 2001-2003 by the Insti-
+       tute  of  Electrical  and Electronics Engineers, Inc and
+       The Open Group. In the event of any discrepancy  between
+       this  version  and  the original IEEE and The Open Group
+       Standard, the original IEEE and The Open Group  Standard
+       is  the  referee  document. The original Standard can be
+       obtained        online        at        http://www.open-
+       group.org/unix/online.html .
+
+
+
+POSIX                         2003                        df(P)