diff options
Diffstat (limited to 'coreutils-5.3.0-bin/contrib/sed/4.2.1/sed-4.2.1/sed-4.2.1-src/doc/sed.info')
| -rw-r--r-- | coreutils-5.3.0-bin/contrib/sed/4.2.1/sed-4.2.1/sed-4.2.1-src/doc/sed.info | 2558 |
1 files changed, 2558 insertions, 0 deletions
diff --git a/coreutils-5.3.0-bin/contrib/sed/4.2.1/sed-4.2.1/sed-4.2.1-src/doc/sed.info b/coreutils-5.3.0-bin/contrib/sed/4.2.1/sed-4.2.1/sed-4.2.1-src/doc/sed.info new file mode 100644 index 0000000..5e1c9ae --- /dev/null +++ b/coreutils-5.3.0-bin/contrib/sed/4.2.1/sed-4.2.1/sed-4.2.1-src/doc/sed.info @@ -0,0 +1,2558 @@ +This is ../../doc/sed.info, produced by makeinfo version 4.12 from +../../doc//config.texi. + +INFO-DIR-SECTION Text creation and manipulation +START-INFO-DIR-ENTRY +* sed: (sed). Stream EDitor. + +END-INFO-DIR-ENTRY + + This file documents version 4.2.1 of GNU `sed', a stream editor. + + Copyright (C) 1998, 1999, 2001, 2002, 2003, 2004 Free Software +Foundation, Inc. + + This document is released under the terms of the GNU Free +Documentation License as published by the Free Software Foundation; +either version 1.1, or (at your option) any later version. + + You should have received a copy of the GNU Free Documentation +License along with GNU `sed'; see the file `COPYING.DOC'. If not, +write to the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02110-1301, USA. + + There are no Cover Texts and no Invariant Sections; this text, along +with its equivalent in the printed manual, constitutes the Title Page. + + +File: sed.info, Node: Top, Next: Introduction, Up: (dir) + +sed, a stream editor +******************** + +This file documents version 4.2.1 of GNU `sed', a stream editor. + + Copyright (C) 1998, 1999, 2001, 2002, 2003, 2004 Free Software +Foundation, Inc. + + This document is released under the terms of the GNU Free +Documentation License as published by the Free Software Foundation; +either version 1.1, or (at your option) any later version. + + You should have received a copy of the GNU Free Documentation +License along with GNU `sed'; see the file `COPYING.DOC'. If not, +write to the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02110-1301, USA. + + There are no Cover Texts and no Invariant Sections; this text, along +with its equivalent in the printed manual, constitutes the Title Page. + +* Menu: + +* Introduction:: Introduction +* Invoking sed:: Invocation +* sed Programs:: `sed' programs +* Examples:: Some sample scripts +* Limitations:: Limitations and (non-)limitations of GNU `sed' +* Other Resources:: Other resources for learning about `sed' +* Reporting Bugs:: Reporting bugs + +* Extended regexps:: `egrep'-style regular expressions + +* Concept Index:: A menu with all the topics in this manual. +* Command and Option Index:: A menu with all `sed' commands and + command-line options. + +--- The detailed node listing --- + +sed Programs: +* Execution Cycle:: How `sed' works +* Addresses:: Selecting lines with `sed' +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: `sed''s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for `sed' gurus +* Extended Commands:: Commands specific of GNU `sed' +* Escapes:: Specifying special characters + +Examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines + + +File: sed.info, Node: Introduction, Next: Invoking sed, Prev: Top, Up: Top + +1 Introduction +************** + +`sed' is a stream editor. A stream editor is used to perform basic text +transformations on an input stream (a file or input from a pipeline). +While in some ways similar to an editor which permits scripted edits +(such as `ed'), `sed' works by making only one pass over the input(s), +and is consequently more efficient. But it is `sed''s ability to +filter text in a pipeline which particularly distinguishes it from +other types of editors. + + +File: sed.info, Node: Invoking sed, Next: sed Programs, Prev: Introduction, Up: Top + +2 Invocation +************ + +Normally `sed' is invoked like this: + + sed SCRIPT INPUTFILE... + + The full format for invoking `sed' is: + + sed OPTIONS... [SCRIPT] [INPUTFILE...] + + If you do not specify INPUTFILE, or if INPUTFILE is `-', `sed' +filters the contents of the standard input. The SCRIPT is actually the +first non-option parameter, which `sed' specially considers a script +and not an input file if (and only if) none of the other OPTIONS +specifies a script to be executed, that is if neither of the `-e' and +`-f' options is specified. + + `sed' may be invoked with the following command-line options: + +`--version' + Print out the version of `sed' that is being run and a copyright + notice, then exit. + +`--help' + Print a usage message briefly summarizing these command-line + options and the bug-reporting address, then exit. + +`-n' +`--quiet' +`--silent' + By default, `sed' prints out the pattern space at the end of each + cycle through the script (*note How `sed' works: Execution Cycle.). + These options disable this automatic printing, and `sed' only + produces output when explicitly told to via the `p' command. + +`-e SCRIPT' +`--expression=SCRIPT' + Add the commands in SCRIPT to the set of commands to be run while + processing the input. + +`-f SCRIPT-FILE' +`--file=SCRIPT-FILE' + Add the commands contained in the file SCRIPT-FILE to the set of + commands to be run while processing the input. + +`-i[SUFFIX]' +`--in-place[=SUFFIX]' + This option specifies that files are to be edited in-place. GNU + `sed' does this by creating a temporary file and sending output to + this file rather than to the standard output.(1). + + This option implies `-s'. + + When the end of the file is reached, the temporary file is renamed + to the output file's original name. The extension, if supplied, + is used to modify the name of the old file before renaming the + temporary file, thereby making a backup copy(2)). + + This rule is followed: if the extension doesn't contain a `*', + then it is appended to the end of the current filename as a + suffix; if the extension does contain one or more `*' characters, + then _each_ asterisk is replaced with the current filename. This + allows you to add a prefix to the backup file, instead of (or in + addition to) a suffix, or even to place backup copies of the + original files into another directory (provided the directory + already exists). + + If no extension is supplied, the original file is overwritten + without making a backup. + +`-l N' +`--line-length=N' + Specify the default line-wrap length for the `l' command. A + length of 0 (zero) means to never wrap long lines. If not + specified, it is taken to be 70. + +`--posix' + GNU `sed' includes several extensions to POSIX sed. In order to + simplify writing portable scripts, this option disables all the + extensions that this manual documents, including additional + commands. Most of the extensions accept `sed' programs that are + outside the syntax mandated by POSIX, but some of them (such as + the behavior of the `N' command described in *note Reporting + Bugs::) actually violate the standard. If you want to disable + only the latter kind of extension, you can set the + `POSIXLY_CORRECT' variable to a non-empty value. + +`-b' +`--binary' + This option is available on every platform, but is only effective + where the operating system makes a distinction between text files + and binary files. When such a distinction is made--as is the case + for MS-DOS, Windows, Cygwin--text files are composed of lines + separated by a carriage return _and_ a line feed character, and + `sed' does not see the ending CR. When this option is specified, + `sed' will open input files in binary mode, thus not requesting + this special processing and considering lines to end at a line + feed. + +`--follow-symlinks' + This option is available only on platforms that support symbolic + links and has an effect only if option `-i' is specified. In this + case, if the file that is specified on the command line is a + symbolic link, `sed' will follow the link and edit the ultimate + destination of the link. The default behavior is to break the + symbolic link, so that the link destination will not be modified. + +`-r' +`--regexp-extended' + Use extended regular expressions rather than basic regular + expressions. Extended regexps are those that `egrep' accepts; + they can be clearer because they usually have less backslashes, + but are a GNU extension and hence scripts that use them are not + portable. *Note Extended regular expressions: Extended regexps. + +`-s' +`--separate' + By default, `sed' will consider the files specified on the command + line as a single continuous long stream. This GNU `sed' extension + allows the user to consider them as separate files: range + addresses (such as `/abc/,/def/') are not allowed to span several + files, line numbers are relative to the start of each file, `$' + refers to the last line of each file, and files invoked from the + `R' commands are rewound at the start of each file. + +`-u' +`--unbuffered' + Buffer both input and output as minimally as practical. (This is + particularly useful if the input is coming from the likes of `tail + -f', and you wish to see the transformed output as soon as + possible.) + + + If no `-e', `-f', `--expression', or `--file' options are given on +the command-line, then the first non-option argument on the command +line is taken to be the SCRIPT to be executed. + + If any command-line parameters remain after processing the above, +these parameters are interpreted as the names of input files to be +processed. A file name of `-' refers to the standard input stream. +The standard input will be processed if no file names are specified. + + ---------- Footnotes ---------- + + (1) This applies to commands such as `=', `a', `c', `i', `l', `p'. +You can still write to the standard output by using the `w' or `W' +commands together with the `/dev/stdout' special file + + (2) Note that GNU `sed' creates the backup file whether or not any +output is actually changed. + + +File: sed.info, Node: sed Programs, Next: Examples, Prev: Invoking sed, Up: Top + +3 `sed' Programs +**************** + +A `sed' program consists of one or more `sed' commands, passed in by +one or more of the `-e', `-f', `--expression', and `--file' options, or +the first non-option argument if zero of these options are used. This +document will refer to "the" `sed' script; this is understood to mean +the in-order catenation of all of the SCRIPTs and SCRIPT-FILEs passed +in. + + Each `sed' command consists of an optional address or address range, +followed by a one-character command name and any additional +command-specific code. + +* Menu: + +* Execution Cycle:: How `sed' works +* Addresses:: Selecting lines with `sed' +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: `sed''s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for `sed' gurus +* Extended Commands:: Commands specific of GNU `sed' +* Escapes:: Specifying special characters + + +File: sed.info, Node: Execution Cycle, Next: Addresses, Up: sed Programs + +3.1 How `sed' Works +=================== + +`sed' maintains two data buffers: the active _pattern_ space, and the +auxiliary _hold_ space. Both are initially empty. + + `sed' operates by performing the following cycle on each lines of +input: first, `sed' reads one line from the input stream, removes any +trailing newline, and places it in the pattern space. Then commands +are executed; each command can have an address associated to it: +addresses are a kind of condition code, and a command is only executed +if the condition is verified before the command is to be executed. + + When the end of the script is reached, unless the `-n' option is in +use, the contents of pattern space are printed out to the output +stream, adding back the trailing newline if it was removed.(1) Then the +next cycle starts for the next input line. + + Unless special commands (like `D') are used, the pattern space is +deleted between two cycles. The hold space, on the other hand, keeps +its data between cycles (see commands `h', `H', `x', `g', `G' to move +data between both buffers). + + ---------- Footnotes ---------- + + (1) Actually, if `sed' prints a line without the terminating +newline, it will nevertheless print the missing newline as soon as more +text is sent to the same output stream, which gives the "least expected +surprise" even though it does not make commands like `sed -n p' exactly +identical to `cat'. + + +File: sed.info, Node: Addresses, Next: Regular Expressions, Prev: Execution Cycle, Up: sed Programs + +3.2 Selecting lines with `sed' +============================== + +Addresses in a `sed' script can be in any of the following forms: +`NUMBER' + Specifying a line number will match only that line in the input. + (Note that `sed' counts lines continuously across all input files + unless `-i' or `-s' options are specified.) + +`FIRST~STEP' + This GNU extension matches every STEPth line starting with line + FIRST. In particular, lines will be selected when there exists a + non-negative N such that the current line-number equals FIRST + (N + * STEP). Thus, to select the odd-numbered lines, one would use + `1~2'; to pick every third line starting with the second, `2~3' + would be used; to pick every fifth line starting with the tenth, + use `10~5'; and `50~0' is just an obscure way of saying `50'. + +`$' + This address matches the last line of the last file of input, or + the last line of each file when the `-i' or `-s' options are + specified. + +`/REGEXP/' + This will select any line which matches the regular expression + REGEXP. If REGEXP itself includes any `/' characters, each must + be escaped by a backslash (`\'). + + The empty regular expression `//' repeats the last regular + expression match (the same holds if the empty regular expression is + passed to the `s' command). Note that modifiers to regular + expressions are evaluated when the regular expression is compiled, + thus it is invalid to specify them together with the empty regular + expression. + +`\%REGEXP%' + (The `%' may be replaced by any other single character.) + + This also matches the regular expression REGEXP, but allows one to + use a different delimiter than `/'. This is particularly useful + if the REGEXP itself contains a lot of slashes, since it avoids + the tedious escaping of every `/'. If REGEXP itself includes any + delimiter characters, each must be escaped by a backslash (`\'). + +`/REGEXP/I' +`\%REGEXP%I' + The `I' modifier to regular-expression matching is a GNU extension + which causes the REGEXP to be matched in a case-insensitive manner. + +`/REGEXP/M' +`\%REGEXP%M' + The `M' modifier to regular-expression matching is a GNU `sed' + extension which causes `^' and `$' to match respectively (in + addition to the normal behavior) the empty string after a newline, + and the empty string before a newline. There are special character + sequences (`\`' and `\'') which always match the beginning or the + end of the buffer. `M' stands for `multi-line'. + + + If no addresses are given, then all lines are matched; if one +address is given, then only lines matching that address are matched. + + An address range can be specified by specifying two addresses +separated by a comma (`,'). An address range matches lines starting +from where the first address matches, and continues until the second +address matches (inclusively). + + If the second address is a REGEXP, then checking for the ending +match will start with the line _following_ the line which matched the +first address: a range will always span at least two lines (except of +course if the input stream ends). + + If the second address is a NUMBER less than (or equal to) the line +matching the first address, then only the one line is matched. + + GNU `sed' also supports some special two-address forms; all these +are GNU extensions: +`0,/REGEXP/' + A line number of `0' can be used in an address specification like + `0,/REGEXP/' so that `sed' will try to match REGEXP in the first + input line too. In other words, `0,/REGEXP/' is similar to + `1,/REGEXP/', except that if ADDR2 matches the very first line of + input the `0,/REGEXP/' form will consider it to end the range, + whereas the `1,/REGEXP/' form will match the beginning of its + range and hence make the range span up to the _second_ occurrence + of the regular expression. + + Note that this is the only place where the `0' address makes + sense; there is no 0-th line and commands which are given the `0' + address in any other way will give an error. + +`ADDR1,+N' + Matches ADDR1 and the N lines following ADDR1. + +`ADDR1,~N' + Matches ADDR1 and the lines following ADDR1 until the next line + whose input line number is a multiple of N. + + Appending the `!' character to the end of an address specification +negates the sense of the match. That is, if the `!' character follows +an address range, then only lines which do _not_ match the address range +will be selected. This also works for singleton addresses, and, +perhaps perversely, for the null address. + + +File: sed.info, Node: Regular Expressions, Next: Common Commands, Prev: Addresses, Up: sed Programs + +3.3 Overview of Regular Expression Syntax +========================================= + +To know how to use `sed', people should understand regular expressions +("regexp" for short). A regular expression is a pattern that is +matched against a subject string from left to right. Most characters +are "ordinary": they stand for themselves in a pattern, and match the +corresponding characters in the subject. As a trivial example, the +pattern + + The quick brown fox + +matches a portion of a subject string that is identical to itself. The +power of regular expressions comes from the ability to include +alternatives and repetitions in the pattern. These are encoded in the +pattern by the use of "special characters", which do not stand for +themselves but instead are interpreted in some special way. Here is a +brief description of regular expression syntax as used in `sed'. + +`CHAR' + A single ordinary character matches itself. + +`*' + Matches a sequence of zero or more instances of matches for the + preceding regular expression, which must be an ordinary character, + a special character preceded by `\', a `.', a grouped regexp (see + below), or a bracket expression. As a GNU extension, a postfixed + regular expression can also be followed by `*'; for example, `a**' + is equivalent to `a*'. POSIX 1003.1-2001 says that `*' stands for + itself when it appears at the start of a regular expression or + subexpression, but many nonGNU implementations do not support this + and portable scripts should instead use `\*' in these contexts. + +`\+' + As `*', but matches one or more. It is a GNU extension. + +`\?' + As `*', but only matches zero or one. It is a GNU extension. + +`\{I\}' + As `*', but matches exactly I sequences (I is a decimal integer; + for portability, keep it between 0 and 255 inclusive). + +`\{I,J\}' + Matches between I and J, inclusive, sequences. + +`\{I,\}' + Matches more than or equal to I sequences. + +`\(REGEXP\)' + Groups the inner REGEXP as a whole, this is used to: + + * Apply postfix operators, like `\(abcd\)*': this will search + for zero or more whole sequences of `abcd', while `abcd*' + would search for `abc' followed by zero or more occurrences + of `d'. Note that support for `\(abcd\)*' is required by + POSIX 1003.1-2001, but many non-GNU implementations do not + support it and hence it is not universally portable. + + * Use back references (see below). + +`.' + Matches any character, including newline. + +`^' + Matches the null string at beginning of the pattern space, i.e. + what appears after the circumflex must appear at the beginning of + the pattern space. + + In most scripts, pattern space is initialized to the content of + each line (*note How `sed' works: Execution Cycle.). So, it is a + useful simplification to think of `^#include' as matching only + lines where `#include' is the first thing on line--if there are + spaces before, for example, the match fails. This simplification + is valid as long as the original content of pattern space is not + modified, for example with an `s' command. + + `^' acts as a special character only at the beginning of the + regular expression or subexpression (that is, after `\(' or `\|'). + Portable scripts should avoid `^' at the beginning of a + subexpression, though, as POSIX allows implementations that treat + `^' as an ordinary character in that context. + +`$' + It is the same as `^', but refers to end of pattern space. `$' + also acts as a special character only at the end of the regular + expression or subexpression (that is, before `\)' or `\|'), and + its use at the end of a subexpression is not portable. + +`[LIST]' +`[^LIST]' + Matches any single character in LIST: for example, `[aeiou]' + matches all vowels. A list may include sequences like + `CHAR1-CHAR2', which matches any character between (inclusive) + CHAR1 and CHAR2. + + A leading `^' reverses the meaning of LIST, so that it matches any + single character _not_ in LIST. To include `]' in the list, make + it the first character (after the `^' if needed), to include `-' + in the list, make it the first or last; to include `^' put it + after the first character. + + The characters `$', `*', `.', `[', and `\' are normally not + special within LIST. For example, `[\*]' matches either `\' or + `*', because the `\' is not special here. However, strings like + `[.ch.]', `[=a=]', and `[:space:]' are special within LIST and + represent collating symbols, equivalence classes, and character + classes, respectively, and `[' is therefore special within LIST + when it is followed by `.', `=', or `:'. Also, when not in + `POSIXLY_CORRECT' mode, special escapes like `\n' and `\t' are + recognized within LIST. *Note Escapes::. + +`REGEXP1\|REGEXP2' + Matches either REGEXP1 or REGEXP2. Use parentheses to use complex + alternative regular expressions. The matching process tries each + alternative in turn, from left to right, and the first one that + succeeds is used. It is a GNU extension. + +`REGEXP1REGEXP2' + Matches the concatenation of REGEXP1 and REGEXP2. Concatenation + binds more tightly than `\|', `^', and `$', but less tightly than + the other regular expression operators. + +`\DIGIT' + Matches the DIGIT-th `\(...\)' parenthesized subexpression in the + regular expression. This is called a "back reference". + Subexpressions are implicity numbered by counting occurrences of + `\(' left-to-right. + +`\n' + Matches the newline character. + +`\CHAR' + Matches CHAR, where CHAR is one of `$', `*', `.', `[', `\', or `^'. + Note that the only C-like backslash sequences that you can + portably assume to be interpreted are `\n' and `\\'; in particular + `\t' is not portable, and matches a `t' under most implementations + of `sed', rather than a tab character. + + + Note that the regular expression matcher is greedy, i.e., matches +are attempted from left to right and, if two or more matches are +possible starting at the same character, it selects the longest. + +Examples: +`abcdef' + Matches `abcdef'. + +`a*b' + Matches zero or more `a's followed by a single `b'. For example, + `b' or `aaaaab'. + +`a\?b' + Matches `b' or `ab'. + +`a\+b\+' + Matches one or more `a's followed by one or more `b's: `ab' is the + shortest possible match, but other examples are `aaaab' or + `abbbbb' or `aaaaaabbbbbbb'. + +`.*' +`.\+' + These two both match all the characters in a string; however, the + first matches every string (including the empty string), while the + second matches only strings containing at least one character. + +`^main.*(.*)' + his matches a string starting with `main', followed by an opening + and closing parenthesis. The `n', `(' and `)' need not be + adjacent. + +`^#' + This matches a string beginning with `#'. + +`\\$' + This matches a string ending with a single backslash. The regexp + contains two backslashes for escaping. + +`\$' + Instead, this matches a string consisting of a single dollar sign, + because it is escaped. + +`[a-zA-Z0-9]' + In the C locale, this matches any ASCII letters or digits. + +`[^ tab]\+' + (Here `tab' stands for a single tab character.) This matches a + string of one or more characters, none of which is a space or a + tab. Usually this means a word. + +`^\(.*\)\n\1$' + This matches a string consisting of two equal substrings separated + by a newline. + +`.\{9\}A$' + This matches nine characters followed by an `A'. + +`^.\{15\}A' + This matches the start of a string that contains 16 characters, + the last of which is an `A'. + + + +File: sed.info, Node: Common Commands, Next: The "s" Command, Prev: Regular Expressions, Up: sed Programs + +3.4 Often-Used Commands +======================= + +If you use `sed' at all, you will quite likely want to know these +commands. + +`#' + [No addresses allowed.] + + The `#' character begins a comment; the comment continues until + the next newline. + + If you are concerned about portability, be aware that some + implementations of `sed' (which are not POSIX conformant) may only + support a single one-line comment, and then only when the very + first character of the script is a `#'. + + Warning: if the first two characters of the `sed' script are `#n', + then the `-n' (no-autoprint) option is forced. If you want to put + a comment in the first line of your script and that comment begins + with the letter `n' and you do not want this behavior, then be + sure to either use a capital `N', or place at least one space + before the `n'. + +`q [EXIT-CODE]' + This command only accepts a single address. + + Exit `sed' without processing any more commands or input. Note + that the current pattern space is printed if auto-print is not + disabled with the `-n' options. The ability to return an exit + code from the `sed' script is a GNU `sed' extension. + +`d' + Delete the pattern space; immediately start next cycle. + +`p' + Print out the pattern space (to the standard output). This + command is usually only used in conjunction with the `-n' + command-line option. + +`n' + If auto-print is not disabled, print the pattern space, then, + regardless, replace the pattern space with the next line of input. + If there is no more input then `sed' exits without processing any + more commands. + +`{ COMMANDS }' + A group of commands may be enclosed between `{' and `}' characters. + This is particularly useful when you want a group of commands to + be triggered by a single address (or address-range) match. + + + +File: sed.info, Node: The "s" Command, Next: Other Commands, Prev: Common Commands, Up: sed Programs + +3.5 The `s' Command +=================== + +The syntax of the `s' (as in substitute) command is +`s/REGEXP/REPLACEMENT/FLAGS'. The `/' characters may be uniformly +replaced by any other single character within any given `s' command. +The `/' character (or whatever other character is used in its stead) +can appear in the REGEXP or REPLACEMENT only if it is preceded by a `\' +character. + + The `s' command is probably the most important in `sed' and has a +lot of different options. Its basic concept is simple: the `s' command +attempts to match the pattern space against the supplied REGEXP; if the +match is successful, then that portion of the pattern space which was +matched is replaced with REPLACEMENT. + + The REPLACEMENT can contain `\N' (N being a number from 1 to 9, +inclusive) references, which refer to the portion of the match which is +contained between the Nth `\(' and its matching `\)'. Also, the +REPLACEMENT can contain unescaped `&' characters which reference the +whole matched portion of the pattern space. Finally, as a GNU `sed' +extension, you can include a special sequence made of a backslash and +one of the letters `L', `l', `U', `u', or `E'. The meaning is as +follows: + +`\L' + Turn the replacement to lowercase until a `\U' or `\E' is found, + +`\l' + Turn the next character to lowercase, + +`\U' + Turn the replacement to uppercase until a `\L' or `\E' is found, + +`\u' + Turn the next character to uppercase, + +`\E' + Stop case conversion started by `\L' or `\U'. + + To include a literal `\', `&', or newline in the final replacement, +be sure to precede the desired `\', `&', or newline in the REPLACEMENT +with a `\'. + + The `s' command can be followed by zero or more of the following +FLAGS: + +`g' + Apply the replacement to _all_ matches to the REGEXP, not just the + first. + +`NUMBER' + Only replace the NUMBERth match of the REGEXP. + + Note: the POSIX standard does not specify what should happen when + you mix the `g' and NUMBER modifiers, and currently there is no + widely agreed upon meaning across `sed' implementations. For GNU + `sed', the interaction is defined to be: ignore matches before the + NUMBERth, and then match and replace all matches from the NUMBERth + on. + +`p' + If the substitution was made, then print the new pattern space. + + Note: when both the `p' and `e' options are specified, the + relative ordering of the two produces very different results. In + general, `ep' (evaluate then print) is what you want, but + operating the other way round can be useful for debugging. For + this reason, the current version of GNU `sed' interprets specially + the presence of `p' options both before and after `e', printing + the pattern space before and after evaluation, while in general + flags for the `s' command show their effect just once. This + behavior, although documented, might change in future versions. + +`w FILE-NAME' + If the substitution was made, then write out the result to the + named file. As a GNU `sed' extension, two special values of + FILE-NAME are supported: `/dev/stderr', which writes the result to + the standard error, and `/dev/stdout', which writes to the standard + output.(1) + +`e' + This command allows one to pipe input from a shell command into + pattern space. If a substitution was made, the command that is + found in pattern space is executed and pattern space is replaced + with its output. A trailing newline is suppressed; results are + undefined if the command to be executed contains a NUL character. + This is a GNU `sed' extension. + +`I' +`i' + The `I' modifier to regular-expression matching is a GNU extension + which makes `sed' match REGEXP in a case-insensitive manner. + +`M' +`m' + The `M' modifier to regular-expression matching is a GNU `sed' + extension which causes `^' and `$' to match respectively (in + addition to the normal behavior) the empty string after a newline, + and the empty string before a newline. There are special character + sequences (`\`' and `\'') which always match the beginning or the + end of the buffer. `M' stands for `multi-line'. + + + ---------- Footnotes ---------- + + (1) This is equivalent to `p' unless the `-i' option is being used. + + +File: sed.info, Node: Other Commands, Next: Programming Commands, Prev: The "s" Command, Up: sed Programs + +3.6 Less Frequently-Used Commands +================================= + +Though perhaps less frequently used than those in the previous section, +some very small yet useful `sed' scripts can be built with these +commands. + +`y/SOURCE-CHARS/DEST-CHARS/' + (The `/' characters may be uniformly replaced by any other single + character within any given `y' command.) + + Transliterate any characters in the pattern space which match any + of the SOURCE-CHARS with the corresponding character in DEST-CHARS. + + Instances of the `/' (or whatever other character is used in its + stead), `\', or newlines can appear in the SOURCE-CHARS or + DEST-CHARS lists, provide that each instance is escaped by a `\'. + The SOURCE-CHARS and DEST-CHARS lists _must_ contain the same + number of characters (after de-escaping). + +`a\' +`TEXT' + As a GNU extension, this command accepts two addresses. + + Queue the lines of text which follow this command (each but the + last ending with a `\', which are removed from the output) to be + output at the end of the current cycle, or when the next input + line is read. + + Escape sequences in TEXT are processed, so you should use `\\' in + TEXT to print a single backslash. + + As a GNU extension, if between the `a' and the newline there is + other than a whitespace-`\' sequence, then the text of this line, + starting at the first non-whitespace character after the `a', is + taken as the first line of the TEXT block. (This enables a + simplification in scripting a one-line add.) This extension also + works with the `i' and `c' commands. + +`i\' +`TEXT' + As a GNU extension, this command accepts two addresses. + + Immediately output the lines of text which follow this command + (each but the last ending with a `\', which are removed from the + output). + +`c\' +`TEXT' + Delete the lines matching the address or address-range, and output + the lines of text which follow this command (each but the last + ending with a `\', which are removed from the output) in place of + the last line (or in place of each line, if no addresses were + specified). A new cycle is started after this command is done, + since the pattern space will have been deleted. + +`=' + As a GNU extension, this command accepts two addresses. + + Print out the current input line number (with a trailing newline). + +`l N' + Print the pattern space in an unambiguous form: non-printable + characters (and the `\' character) are printed in C-style escaped + form; long lines are split, with a trailing `\' character to + indicate the split; the end of each line is marked with a `$'. + + N specifies the desired line-wrap length; a length of 0 (zero) + means to never wrap long lines. If omitted, the default as + specified on the command line is used. The N parameter is a GNU + `sed' extension. + +`r FILENAME' + As a GNU extension, this command accepts two addresses. + + Queue the contents of FILENAME to be read and inserted into the + output stream at the end of the current cycle, or when the next + input line is read. Note that if FILENAME cannot be read, it is + treated as if it were an empty file, without any error indication. + + As a GNU `sed' extension, the special value `/dev/stdin' is + supported for the file name, which reads the contents of the + standard input. + +`w FILENAME' + Write the pattern space to FILENAME. As a GNU `sed' extension, + two special values of FILE-NAME are supported: `/dev/stderr', + which writes the result to the standard error, and `/dev/stdout', + which writes to the standard output.(1) + + The file will be created (or truncated) before the first input + line is read; all `w' commands (including instances of `w' flag on + successful `s' commands) which refer to the same FILENAME are + output without closing and reopening the file. + +`D' + Delete text in the pattern space up to the first newline. If any + text is left, restart cycle with the resultant pattern space + (without reading a new line of input), otherwise start a normal + new cycle. + +`N' + Add a newline to the pattern space, then append the next line of + input to the pattern space. If there is no more input then `sed' + exits without processing any more commands. + +`P' + Print out the portion of the pattern space up to the first newline. + +`h' + Replace the contents of the hold space with the contents of the + pattern space. + +`H' + Append a newline to the contents of the hold space, and then + append the contents of the pattern space to that of the hold space. + +`g' + Replace the contents of the pattern space with the contents of the + hold space. + +`G' + Append a newline to the contents of the pattern space, and then + append the contents of the hold space to that of the pattern space. + +`x' + Exchange the contents of the hold and pattern spaces. + + + ---------- Footnotes ---------- + + (1) This is equivalent to `p' unless the `-i' option is being used. + + +File: sed.info, Node: Programming Commands, Next: Extended Commands, Prev: Other Commands, Up: sed Programs + +3.7 Commands for `sed' gurus +============================ + +In most cases, use of these commands indicates that you are probably +better off programming in something like `awk' or Perl. But +occasionally one is committed to sticking with `sed', and these +commands can enable one to write quite convoluted scripts. + +`: LABEL' + [No addresses allowed.] + + Specify the location of LABEL for branch commands. In all other + respects, a no-op. + +`b LABEL' + Unconditionally branch to LABEL. The LABEL may be omitted, in + which case the next cycle is started. + +`t LABEL' + Branch to LABEL only if there has been a successful `s'ubstitution + since the last input line was read or conditional branch was taken. + The LABEL may be omitted, in which case the next cycle is started. + + + +File: sed.info, Node: Extended Commands, Next: Escapes, Prev: Programming Commands, Up: sed Programs + +3.8 Commands Specific to GNU `sed' +================================== + +These commands are specific to GNU `sed', so you must use them with +care and only when you are sure that hindering portability is not evil. +They allow you to check for GNU `sed' extensions or to do tasks that +are required quite often, yet are unsupported by standard `sed's. + +`e [COMMAND]' + This command allows one to pipe input from a shell command into + pattern space. Without parameters, the `e' command executes the + command that is found in pattern space and replaces the pattern + space with the output; a trailing newline is suppressed. + + If a parameter is specified, instead, the `e' command interprets + it as a command and sends its output to the output stream (like + `r' does). The command can run across multiple lines, all but the + last ending with a back-slash. + + In both cases, the results are undefined if the command to be + executed contains a NUL character. + +`L N' + This GNU `sed' extension fills and joins lines in pattern space to + produce output lines of (at most) N characters, like `fmt' does; + if N is omitted, the default as specified on the command line is + used. This command is considered a failed experiment and unless + there is enough request (which seems unlikely) will be removed in + future versions. + +`Q [EXIT-CODE]' + This command only accepts a single address. + + This command is the same as `q', but will not print the contents + of pattern space. Like `q', it provides the ability to return an + exit code to the caller. + + This command can be useful because the only alternative ways to + accomplish this apparently trivial function are to use the `-n' + option (which can unnecessarily complicate your script) or + resorting to the following snippet, which wastes time by reading + the whole file without any visible effect: + + :eat + $d Quit silently on the last line + N Read another line, silently + g Overwrite pattern space each time to save memory + b eat + +`R FILENAME' + Queue a line of FILENAME to be read and inserted into the output + stream at the end of the current cycle, or when the next input + line is read. Note that if FILENAME cannot be read, or if its end + is reached, no line is appended, without any error indication. + + As with the `r' command, the special value `/dev/stdin' is + supported for the file name, which reads a line from the standard + input. + +`T LABEL' + Branch to LABEL only if there have been no successful + `s'ubstitutions since the last input line was read or conditional + branch was taken. The LABEL may be omitted, in which case the next + cycle is started. + +`v VERSION' + This command does nothing, but makes `sed' fail if GNU `sed' + extensions are not supported, simply because other versions of + `sed' do not implement it. In addition, you can specify the + version of `sed' that your script requires, such as `4.0.5'. The + default is `4.0' because that is the first version that + implemented this command. + + This command enables all GNU extensions even if `POSIXLY_CORRECT' + is set in the environment. + +`W FILENAME' + Write to the given filename the portion of the pattern space up to + the first newline. Everything said under the `w' command about + file handling holds here too. + +`z' + This command empties the content of pattern space. It is usually + the same as `s/.*//', but is more efficient and works in the + presence of invalid multibyte sequences in the input stream. + POSIX mandates that such sequences are _not_ matched by `.', so + that there is no portable way to clear `sed''s buffers in the + middle of the script in most multibyte locales (including UTF-8 + locales). + + +File: sed.info, Node: Escapes, Prev: Extended Commands, Up: sed Programs + +3.9 GNU Extensions for Escapes in Regular Expressions +===================================================== + +Until this chapter, we have only encountered escapes of the form `\^', +which tell `sed' not to interpret the circumflex as a special +character, but rather to take it literally. For example, `\*' matches +a single asterisk rather than zero or more backslashes. + + This chapter introduces another kind of escape(1)--that is, escapes +that are applied to a character or sequence of characters that +ordinarily are taken literally, and that `sed' replaces with a special +character. This provides a way of encoding non-printable characters in +patterns in a visible manner. There is no restriction on the +appearance of non-printing characters in a `sed' script but when a +script is being prepared in the shell or by text editing, it is usually +easier to use one of the following escape sequences than the binary +character it represents: + + The list of these escapes is: + +`\a' + Produces or matches a BEL character, that is an "alert" (ASCII 7). + +`\f' + Produces or matches a form feed (ASCII 12). + +`\n' + Produces or matches a newline (ASCII 10). + +`\r' + Produces or matches a carriage return (ASCII 13). + +`\t' + Produces or matches a horizontal tab (ASCII 9). + +`\v' + Produces or matches a so called "vertical tab" (ASCII 11). + +`\cX' + Produces or matches `CONTROL-X', where X is any character. The + precise effect of `\cX' is as follows: if X is a lower case + letter, it is converted to upper case. Then bit 6 of the + character (hex 40) is inverted. Thus `\cz' becomes hex 1A, but + `\c{' becomes hex 3B, while `\c;' becomes hex 7B. + +`\dXXX' + Produces or matches a character whose decimal ASCII value is XXX. + +`\oXXX' + Produces or matches a character whose octal ASCII value is XXX. + +`\xXX' + Produces or matches a character whose hexadecimal ASCII value is + XX. + + `\b' (backspace) was omitted because of the conflict with the +existing "word boundary" meaning. + + Other escapes match a particular character class and are valid only +in regular expressions: + +`\w' + Matches any "word" character. A "word" character is any letter or + digit or the underscore character. + +`\W' + Matches any "non-word" character. + +`\b' + Matches a word boundary; that is it matches if the character to + the left is a "word" character and the character to the right is a + "non-word" character, or vice-versa. + +`\B' + Matches everywhere but on a word boundary; that is it matches if + the character to the left and the character to the right are + either both "word" characters or both "non-word" characters. + +`\`' + Matches only at the start of pattern space. This is different + from `^' in multi-line mode. + +`\'' + Matches only at the end of pattern space. This is different from + `$' in multi-line mode. + + + ---------- Footnotes ---------- + + (1) All the escapes introduced here are GNU extensions, with the +exception of `\n'. In basic regular expression mode, setting +`POSIXLY_CORRECT' disables them inside bracket expressions. + + +File: sed.info, Node: Examples, Next: Limitations, Prev: sed Programs, Up: Top + +4 Some Sample Scripts +********************* + +Here are some `sed' scripts to guide you in the art of mastering `sed'. + +* Menu: + +Some exotic examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: + +Emulating standard utilities: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines + + +File: sed.info, Node: Centering lines, Next: Increment a number, Up: Examples + +4.1 Centering Lines +=================== + +This script centers all lines of a file on a 80 columns width. To +change that width, the number in `\{...\}' must be replaced, and the +number of added spaces also must be changed. + + Note how the buffer commands are used to separate parts in the +regular expressions to be matched--this is a common technique. + + #!/usr/bin/sed -f + + # Put 80 spaces in the buffer + 1 { + x + s/^$/ / + s/^.*$/&&&&&&&&/ + x + } + + # del leading and trailing spaces + y/tab/ / + s/^ *// + s/ *$// + + # add a newline and 80 spaces to end of line + G + + # keep first 81 chars (80 + a newline) + s/^\(.\{81\}\).*$/\1/ + + # \2 matches half of the spaces, which are moved to the beginning + s/^\(.*\)\n\(.*\)\2/\2\1/ + + +File: sed.info, Node: Increment a number, Next: Rename files to lower case, Prev: Centering lines, Up: Examples + +4.2 Increment a Number +====================== + +This script is one of a few that demonstrate how to do arithmetic in +`sed'. This is indeed possible,(1) but must be done manually. + + To increment one number you just add 1 to last digit, replacing it +by the following digit. There is one exception: when the digit is a +nine the previous digits must be also incremented until you don't have +a nine. + + This solution by Bruno Haible is very clever and smart because it +uses a single buffer; if you don't have this limitation, the algorithm +used in *note Numbering lines: cat -n, is faster. It works by +replacing trailing nines with an underscore, then using multiple `s' +commands to increment the last digit, and then again substituting +underscores with zeros. + + #!/usr/bin/sed -f + + /[^0-9]/ d + + # replace all leading 9s by _ (any other character except digits, could + # be used) + :d + s/9\(_*\)$/_\1/ + td + + # incr last digit only. The first line adds a most-significant + # digit of 1 if we have to add a digit. + # + # The `tn' commands are not necessary, but make the thing + # faster + + s/^\(_*\)$/1\1/; tn + s/8\(_*\)$/9\1/; tn + s/7\(_*\)$/8\1/; tn + s/6\(_*\)$/7\1/; tn + s/5\(_*\)$/6\1/; tn + s/4\(_*\)$/5\1/; tn + s/3\(_*\)$/4\1/; tn + s/2\(_*\)$/3\1/; tn + s/1\(_*\)$/2\1/; tn + s/0\(_*\)$/1\1/; tn + + :n + y/_/0/ + + ---------- Footnotes ---------- + + (1) `sed' guru Greg Ubben wrote an implementation of the `dc' RPN +calculator! It is distributed together with sed. + + +File: sed.info, Node: Rename files to lower case, Next: Print bash environment, Prev: Increment a number, Up: Examples + +4.3 Rename Files to Lower Case +============================== + +This is a pretty strange use of `sed'. We transform text, and +transform it to be shell commands, then just feed them to shell. Don't +worry, even worse hacks are done when using `sed'; I have seen a script +converting the output of `date' into a `bc' program! + + The main body of this is the `sed' script, which remaps the name +from lower to upper (or vice-versa) and even checks out if the remapped +name is the same as the original name. Note how the script is +parameterized using shell variables and proper quoting. + + #! /bin/sh + # rename files to lower/upper case... + # + # usage: + # move-to-lower * + # move-to-upper * + # or + # move-to-lower -R . + # move-to-upper -R . + # + + help() + { + cat << eof + Usage: $0 [-n] [-r] [-h] files... + + -n do nothing, only see what would be done + -R recursive (use find) + -h this message + files files to remap to lower case + + Examples: + $0 -n * (see if everything is ok, then...) + $0 * + + $0 -R . + + eof + } + + apply_cmd='sh' + finder='echo "$@" | tr " " "\n"' + files_only= + + while : + do + case "$1" in + -n) apply_cmd='cat' ;; + -R) finder='find "$@" -type f';; + -h) help ; exit 1 ;; + *) break ;; + esac + shift + done + + if [ -z "$1" ]; then + echo Usage: $0 [-h] [-n] [-r] files... + exit 1 + fi + + LOWER='abcdefghijklmnopqrstuvwxyz' + UPPER='ABCDEFGHIJKLMNOPQRSTUVWXYZ' + + case `basename $0` in + *upper*) TO=$UPPER; FROM=$LOWER ;; + *) FROM=$UPPER; TO=$LOWER ;; + esac + + eval $finder | sed -n ' + + # remove all trailing slashes + s/\/*$// + + # add ./ if there is no path, only a filename + /\//! s/^/.\// + + # save path+filename + h + + # remove path + s/.*\/// + + # do conversion only on filename + y/'$FROM'/'$TO'/ + + # now line contains original path+file, while + # hold space contains the new filename + x + + # add converted file name to line, which now contains + # path/file-name\nconverted-file-name + G + + # check if converted file name is equal to original file name, + # if it is, do not print nothing + /^.*\/\(.*\)\n\1/b + + # now, transform path/fromfile\n, into + # mv path/fromfile path/tofile and print it + s/^\(.*\/\)\(.*\)\n\(.*\)$/mv "\1\2" "\1\3"/p + + ' | $apply_cmd + + +File: sed.info, Node: Print bash environment, Next: Reverse chars of lines, Prev: Rename files to lower case, Up: Examples + +4.4 Print `bash' Environment +============================ + +This script strips the definition of the shell functions from the +output of the `set' Bourne-shell command. + + #!/bin/sh + + set | sed -n ' + :x + + # if no occurrence of "=()" print and load next line + /=()/! { p; b; } + / () $/! { p; b; } + + # possible start of functions section + # save the line in case this is a var like FOO="() " + h + + # if the next line has a brace, we quit because + # nothing comes after functions + n + /^{/ q + + # print the old line + x; p + + # work on the new line now + x; bx + ' + + +File: sed.info, Node: Reverse chars of lines, Next: tac, Prev: Print bash environment, Up: Examples + +4.5 Reverse Characters of Lines +=============================== + +This script can be used to reverse the position of characters in lines. +The technique moves two characters at a time, hence it is faster than +more intuitive implementations. + + Note the `tx' command before the definition of the label. This is +often needed to reset the flag that is tested by the `t' command. + + Imaginative readers will find uses for this script. An example is +reversing the output of `banner'.(1) + + #!/usr/bin/sed -f + + /../! b + + # Reverse a line. Begin embedding the line between two newlines + s/^.*$/\ + &\ + / + + # Move first character at the end. The regexp matches until + # there are zero or one characters between the markers + tx + :x + s/\(\n.\)\(.*\)\(.\n\)/\3\2\1/ + tx + + # Remove the newline markers + s/\n//g + + ---------- Footnotes ---------- + + (1) This requires another script to pad the output of banner; for +example + + #! /bin/sh + + banner -w $1 $2 $3 $4 | + sed -e :a -e '/^.\{0,'$1'\}$/ { s/$/ /; ba; }' | + ~/sedscripts/reverseline.sed + + +File: sed.info, Node: tac, Next: cat -n, Prev: Reverse chars of lines, Up: Examples + +4.6 Reverse Lines of Files +========================== + +This one begins a series of totally useless (yet interesting) scripts +emulating various Unix commands. This, in particular, is a `tac' +workalike. + + Note that on implementations other than GNU `sed' this script might +easily overflow internal buffers. + + #!/usr/bin/sed -nf + + # reverse all lines of input, i.e. first line became last, ... + + # from the second line, the buffer (which contains all previous lines) + # is *appended* to current line, so, the order will be reversed + 1! G + + # on the last line we're done -- print everything + $ p + + # store everything on the buffer again + h + + +File: sed.info, Node: cat -n, Next: cat -b, Prev: tac, Up: Examples + +4.7 Numbering Lines +=================== + +This script replaces `cat -n'; in fact it formats its output exactly +like GNU `cat' does. + + Of course this is completely useless and for two reasons: first, +because somebody else did it in C, second, because the following +Bourne-shell script could be used for the same purpose and would be +much faster: + + #! /bin/sh + sed -e "=" $@ | sed -e ' + s/^/ / + N + s/^ *\(......\)\n/\1 / + ' + + It uses `sed' to print the line number, then groups lines two by two +using `N'. Of course, this script does not teach as much as the one +presented below. + + The algorithm used for incrementing uses both buffers, so the line +is printed as soon as possible and then discarded. The number is split +so that changing digits go in a buffer and unchanged ones go in the +other; the changed digits are modified in a single step (using a `y' +command). The line number for the next line is then composed and +stored in the hold space, to be used in the next iteration. + + #!/usr/bin/sed -nf + + # Prime the pump on the first line + x + /^$/ s/^.*$/1/ + + # Add the correct line number before the pattern + G + h + + # Format it and print it + s/^/ / + s/^ *\(......\)\n/\1 /p + + # Get the line number from hold space; add a zero + # if we're going to add a digit on the next line + g + s/\n.*$// + /^9*$/ s/^/0/ + + # separate changing/unchanged digits with an x + s/.9*$/x&/ + + # keep changing digits in hold space + h + s/^.*x// + y/0123456789/1234567890/ + x + + # keep unchanged digits in pattern space + s/x.*$// + + # compose the new number, remove the newline implicitly added by G + G + s/\n// + h + + +File: sed.info, Node: cat -b, Next: wc -c, Prev: cat -n, Up: Examples + +4.8 Numbering Non-blank Lines +============================= + +Emulating `cat -b' is almost the same as `cat -n'--we only have to +select which lines are to be numbered and which are not. + + The part that is common to this script and the previous one is not +commented to show how important it is to comment `sed' scripts +properly... + + #!/usr/bin/sed -nf + + /^$/ { + p + b + } + + # Same as cat -n from now + x + /^$/ s/^.*$/1/ + G + h + s/^/ / + s/^ *\(......\)\n/\1 /p + x + s/\n.*$// + /^9*$/ s/^/0/ + s/.9*$/x&/ + h + s/^.*x// + y/0123456789/1234567890/ + x + s/x.*$// + G + s/\n// + h + + +File: sed.info, Node: wc -c, Next: wc -w, Prev: cat -b, Up: Examples + +4.9 Counting Characters +======================= + +This script shows another way to do arithmetic with `sed'. In this +case we have to add possibly large numbers, so implementing this by +successive increments would not be feasible (and possibly even more +complicated to contrive than this script). + + The approach is to map numbers to letters, kind of an abacus +implemented with `sed'. `a's are units, `b's are tens and so on: we +simply add the number of characters on the current line as units, and +then propagate the carry to tens, hundreds, and so on. + + As usual, running totals are kept in hold space. + + On the last line, we convert the abacus form back to decimal. For +the sake of variety, this is done with a loop rather than with some 80 +`s' commands(1): first we convert units, removing `a's from the number; +then we rotate letters so that tens become `a's, and so on until no +more letters remain. + + #!/usr/bin/sed -nf + + # Add n+1 a's to hold space (+1 is for the newline) + s/./a/g + H + x + s/\n/a/ + + # Do the carry. The t's and b's are not necessary, + # but they do speed up the thing + t a + : a; s/aaaaaaaaaa/b/g; t b; b done + : b; s/bbbbbbbbbb/c/g; t c; b done + : c; s/cccccccccc/d/g; t d; b done + : d; s/dddddddddd/e/g; t e; b done + : e; s/eeeeeeeeee/f/g; t f; b done + : f; s/ffffffffff/g/g; t g; b done + : g; s/gggggggggg/h/g; t h; b done + : h; s/hhhhhhhhhh//g + + : done + $! { + h + b + } + + # On the last line, convert back to decimal + + : loop + /a/! s/[b-h]*/&0/ + s/aaaaaaaaa/9/ + s/aaaaaaaa/8/ + s/aaaaaaa/7/ + s/aaaaaa/6/ + s/aaaaa/5/ + s/aaaa/4/ + s/aaa/3/ + s/aa/2/ + s/a/1/ + + : next + y/bcdefgh/abcdefg/ + /[a-h]/ b loop + p + + ---------- Footnotes ---------- + + (1) Some implementations have a limit of 199 commands per script + + +File: sed.info, Node: wc -w, Next: wc -l, Prev: wc -c, Up: Examples + +4.10 Counting Words +=================== + +This script is almost the same as the previous one, once each of the +words on the line is converted to a single `a' (in the previous script +each letter was changed to an `a'). + + It is interesting that real `wc' programs have optimized loops for +`wc -c', so they are much slower at counting words rather than +characters. This script's bottleneck, instead, is arithmetic, and +hence the word-counting one is faster (it has to manage smaller +numbers). + + Again, the common parts are not commented to show the importance of +commenting `sed' scripts. + + #!/usr/bin/sed -nf + + # Convert words to a's + s/[ tab][ tab]*/ /g + s/^/ / + s/ [^ ][^ ]*/a /g + s/ //g + + # Append them to hold space + H + x + s/\n// + + # From here on it is the same as in wc -c. + /aaaaaaaaaa/! bx; s/aaaaaaaaaa/b/g + /bbbbbbbbbb/! bx; s/bbbbbbbbbb/c/g + /cccccccccc/! bx; s/cccccccccc/d/g + /dddddddddd/! bx; s/dddddddddd/e/g + /eeeeeeeeee/! bx; s/eeeeeeeeee/f/g + /ffffffffff/! bx; s/ffffffffff/g/g + /gggggggggg/! bx; s/gggggggggg/h/g + s/hhhhhhhhhh//g + :x + $! { h; b; } + :y + /a/! s/[b-h]*/&0/ + s/aaaaaaaaa/9/ + s/aaaaaaaa/8/ + s/aaaaaaa/7/ + s/aaaaaa/6/ + s/aaaaa/5/ + s/aaaa/4/ + s/aaa/3/ + s/aa/2/ + s/a/1/ + y/bcdefgh/abcdefg/ + /[a-h]/ by + p + + +File: sed.info, Node: wc -l, Next: head, Prev: wc -w, Up: Examples + +4.11 Counting Lines +=================== + +No strange things are done now, because `sed' gives us `wc -l' +functionality for free!!! Look: + + #!/usr/bin/sed -nf + $= + + +File: sed.info, Node: head, Next: tail, Prev: wc -l, Up: Examples + +4.12 Printing the First Lines +============================= + +This script is probably the simplest useful `sed' script. It displays +the first 10 lines of input; the number of displayed lines is right +before the `q' command. + + #!/usr/bin/sed -f + 10q + + +File: sed.info, Node: tail, Next: uniq, Prev: head, Up: Examples + +4.13 Printing the Last Lines +============================ + +Printing the last N lines rather than the first is more complex but +indeed possible. N is encoded in the second line, before the bang +character. + + This script is similar to the `tac' script in that it keeps the +final output in the hold space and prints it at the end: + + #!/usr/bin/sed -nf + + 1! {; H; g; } + 1,10 !s/[^\n]*\n// + $p + h + + Mainly, the scripts keeps a window of 10 lines and slides it by +adding a line and deleting the oldest (the substitution command on the +second line works like a `D' command but does not restart the loop). + + The "sliding window" technique is a very powerful way to write +efficient and complex `sed' scripts, because commands like `P' would +require a lot of work if implemented manually. + + To introduce the technique, which is fully demonstrated in the rest +of this chapter and is based on the `N', `P' and `D' commands, here is +an implementation of `tail' using a simple "sliding window." + + This looks complicated but in fact the working is the same as the +last script: after we have kicked in the appropriate number of lines, +however, we stop using the hold space to keep inter-line state, and +instead use `N' and `D' to slide pattern space by one line: + + #!/usr/bin/sed -f + + 1h + 2,10 {; H; g; } + $q + 1,9d + N + D + + Note how the first, second and fourth line are inactive after the +first ten lines of input. After that, all the script does is: exiting +on the last line of input, appending the next input line to pattern +space, and removing the first line. + + +File: sed.info, Node: uniq, Next: uniq -d, Prev: tail, Up: Examples + +4.14 Make Duplicate Lines Unique +================================ + +This is an example of the art of using the `N', `P' and `D' commands, +probably the most difficult to master. + + #!/usr/bin/sed -f + h + + :b + # On the last line, print and exit + $b + N + /^\(.*\)\n\1$/ { + # The two lines are identical. Undo the effect of + # the n command. + g + bb + } + + # If the `N' command had added the last line, print and exit + $b + + # The lines are different; print the first and go + # back working on the second. + P + D + + As you can see, we mantain a 2-line window using `P' and `D'. This +technique is often used in advanced `sed' scripts. + + +File: sed.info, Node: uniq -d, Next: uniq -u, Prev: uniq, Up: Examples + +4.15 Print Duplicated Lines of Input +==================================== + +This script prints only duplicated lines, like `uniq -d'. + + #!/usr/bin/sed -nf + + $b + N + /^\(.*\)\n\1$/ { + # Print the first of the duplicated lines + s/.*\n// + p + + # Loop until we get a different line + :b + $b + N + /^\(.*\)\n\1$/ { + s/.*\n// + bb + } + } + + # The last line cannot be followed by duplicates + $b + + # Found a different one. Leave it alone in the pattern space + # and go back to the top, hunting its duplicates + D + + +File: sed.info, Node: uniq -u, Next: cat -s, Prev: uniq -d, Up: Examples + +4.16 Remove All Duplicated Lines +================================ + +This script prints only unique lines, like `uniq -u'. + + #!/usr/bin/sed -f + + # Search for a duplicate line --- until that, print what you find. + $b + N + /^\(.*\)\n\1$/ ! { + P + D + } + + :c + # Got two equal lines in pattern space. At the + # end of the file we simply exit + $d + + # Else, we keep reading lines with `N' until we + # find a different one + s/.*\n// + N + /^\(.*\)\n\1$/ { + bc + } + + # Remove the last instance of the duplicate line + # and go back to the top + D + + +File: sed.info, Node: cat -s, Prev: uniq -u, Up: Examples + +4.17 Squeezing Blank Lines +========================== + +As a final example, here are three scripts, of increasing complexity +and speed, that implement the same function as `cat -s', that is +squeezing blank lines. + + The first leaves a blank line at the beginning and end if there are +some already. + + #!/usr/bin/sed -f + + # on empty lines, join with next + # Note there is a star in the regexp + :x + /^\n*$/ { + N + bx + } + + # now, squeeze all '\n', this can be also done by: + # s/^\(\n\)*/\1/ + s/\n*/\ + / + + This one is a bit more complex and removes all empty lines at the +beginning. It does leave a single blank line at end if one was there. + + #!/usr/bin/sed -f + + # delete all leading empty lines + 1,/^./{ + /./!d + } + + # on an empty line we remove it and all the following + # empty lines, but one + :x + /./!{ + N + s/^\n$// + tx + } + + This removes leading and trailing blank lines. It is also the +fastest. Note that loops are completely done with `n' and `b', without +relying on `sed' to restart the the script automatically at the end of +a line. + + #!/usr/bin/sed -nf + + # delete all (leading) blanks + /./!d + + # get here: so there is a non empty + :x + # print it + p + # get next + n + # got chars? print it again, etc... + /./bx + + # no, don't have chars: got an empty line + :z + # get next, if last line we finish here so no trailing + # empty lines are written + n + # also empty? then ignore it, and get next... this will + # remove ALL empty lines + /./!bz + + # all empty lines were deleted/ignored, but we have a non empty. As + # what we want to do is to squeeze, insert a blank line artificially + i\ + + bx + + +File: sed.info, Node: Limitations, Next: Other Resources, Prev: Examples, Up: Top + +5 GNU `sed''s Limitations and Non-limitations +********************************************* + +For those who want to write portable `sed' scripts, be aware that some +implementations have been known to limit line lengths (for the pattern +and hold spaces) to be no more than 4000 bytes. The POSIX standard +specifies that conforming `sed' implementations shall support at least +8192 byte line lengths. GNU `sed' has no built-in limit on line length; +as long as it can `malloc()' more (virtual) memory, you can feed or +construct lines as long as you like. + + However, recursion is used to handle subpatterns and indefinite +repetition. This means that the available stack space may limit the +size of the buffer that can be processed by certain patterns. + + +File: sed.info, Node: Other Resources, Next: Reporting Bugs, Prev: Limitations, Up: Top + +6 Other Resources for Learning About `sed' +****************************************** + +In addition to several books that have been written about `sed' (either +specifically or as chapters in books which discuss shell programming), +one can find out more about `sed' (including suggestions of a few +books) from the FAQ for the `sed-users' mailing list, available from: + `http://sed.sourceforge.net/sedfaq.html' + + Also of interest are +`http://www.student.northpark.edu/pemente/sed/index.htm' and +`http://sed.sf.net/grabbag', which include `sed' tutorials and other +`sed'-related goodies. + + The `sed-users' mailing list itself maintained by Sven Guckes. To +subscribe, visit `http://groups.yahoo.com' and search for the +`sed-users' mailing list. + + +File: sed.info, Node: Reporting Bugs, Next: Extended regexps, Prev: Other Resources, Up: Top + +7 Reporting Bugs +**************** + +Email bug reports to <bonzini@gnu.org>. Be sure to include the word +"sed" somewhere in the `Subject:' field. Also, please include the +output of `sed --version' in the body of your report if at all possible. + + Please do not send a bug report like this: + + while building frobme-1.3.4 + $ configure + error--> sed: file sedscr line 1: Unknown option to 's' + + If GNU `sed' doesn't configure your favorite package, take a few +extra minutes to identify the specific problem and make a stand-alone +test case. Unlike other programs such as C compilers, making such test +cases for `sed' is quite simple. + + A stand-alone test case includes all the data necessary to perform +the test, and the specific invocation of `sed' that causes the problem. +The smaller a stand-alone test case is, the better. A test case should +not involve something as far removed from `sed' as "try to configure +frobme-1.3.4". Yes, that is in principle enough information to look +for the bug, but that is not a very practical prospect. + + Here are a few commonly reported bugs that are not bugs. + +`N' command on the last line + Most versions of `sed' exit without printing anything when the `N' + command is issued on the last line of a file. GNU `sed' prints + pattern space before exiting unless of course the `-n' command + switch has been specified. This choice is by design. + + For example, the behavior of + sed N foo bar + would depend on whether foo has an even or an odd number of + lines(1). Or, when writing a script to read the next few lines + following a pattern match, traditional implementations of `sed' + would force you to write something like + /foo/{ $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N } + instead of just + /foo/{ N;N;N;N;N;N;N;N;N; } + + In any case, the simplest workaround is to use `$d;N' in scripts + that rely on the traditional behavior, or to set the + `POSIXLY_CORRECT' variable to a non-empty value. + +Regex syntax clashes (problems with backslashes) + `sed' uses the POSIX basic regular expression syntax. According to + the standard, the meaning of some escape sequences is undefined in + this syntax; notable in the case of `sed' are `\|', `\+', `\?', + `\`', `\'', `\<', `\>', `\b', `\B', `\w', and `\W'. + + As in all GNU programs that use POSIX basic regular expressions, + `sed' interprets these escape sequences as special characters. + So, `x\+' matches one or more occurrences of `x'. `abc\|def' + matches either `abc' or `def'. + + This syntax may cause problems when running scripts written for + other `sed's. Some `sed' programs have been written with the + assumption that `\|' and `\+' match the literal characters `|' and + `+'. Such scripts must be modified by removing the spurious + backslashes if they are to be used with modern implementations of + `sed', like GNU `sed'. + + On the other hand, some scripts use s|abc\|def||g to remove + occurrences of _either_ `abc' or `def'. While this worked until + `sed' 4.0.x, newer versions interpret this as removing the string + `abc|def'. This is again undefined behavior according to POSIX, + and this interpretation is arguably more robust: older `sed's, for + example, required that the regex matcher parsed `\/' as `/' in the + common case of escaping a slash, which is again undefined + behavior; the new behavior avoids this, and this is good because + the regex matcher is only partially under our control. + + In addition, this version of `sed' supports several escape + characters (some of which are multi-character) to insert + non-printable characters in scripts (`\a', `\c', `\d', `\o', `\r', + `\t', `\v', `\x'). These can cause similar problems with scripts + written for other `sed's. + +`-i' clobbers read-only files + In short, `sed -i' will let you delete the contents of a read-only + file, and in general the `-i' option (*note Invocation: Invoking + sed.) lets you clobber protected files. This is not a bug, but + rather a consequence of how the Unix filesystem works. + + The permissions on a file say what can happen to the data in that + file, while the permissions on a directory say what can happen to + the list of files in that directory. `sed -i' will not ever open + for writing a file that is already on disk. Rather, it will work + on a temporary file that is finally renamed to the original name: + if you rename or delete files, you're actually modifying the + contents of the directory, so the operation depends on the + permissions of the directory, not of the file. For this same + reason, `sed' does not let you use `-i' on a writeable file in a + read-only directory, and will break hard or symbolic links when + `-i' is used on such a file. + +`0a' does not work (gives an error) + There is no line 0. 0 is a special address that is only used to + treat addresses like `0,/RE/' as active when the script starts: if + you write `1,/abc/d' and the first line includes the word `abc', + then that match would be ignored because address ranges must span + at least two lines (barring the end of the file); but what you + probably wanted is to delete every line up to the first one + including `abc', and this is obtained with `0,/abc/d'. + +`[a-z]' is case insensitive + You are encountering problems with locales. POSIX mandates that + `[a-z]' uses the current locale's collation order - in C parlance, + that means using `strcoll(3)' instead of `strcmp(3)'. Some + locales have a case-insensitive collation order, others don't. + + Another problem is that `[a-z]' tries to use collation symbols. + This only happens if you are on the GNU system, using GNU libc's + regular expression matcher instead of compiling the one supplied + with GNU sed. In a Danish locale, for example, the regular + expression `^[a-z]$' matches the string `aa', because this is a + single collating symbol that comes after `a' and before `b'; `ll' + behaves similarly in Spanish locales, or `ij' in Dutch locales. + + To work around these problems, which may cause bugs in shell + scripts, set the `LC_COLLATE' and `LC_CTYPE' environment variables + to `C'. + +`s/.*//' does not clear pattern space + This happens if your input stream includes invalid multibyte + sequences. POSIX mandates that such sequences are _not_ matched + by `.', so that `s/.*//' will not clear pattern space as you would + expect. In fact, there is no way to clear sed's buffers in the + middle of the script in most multibyte locales (including UTF-8 + locales). For this reason, GNU `sed' provides a `z' command (for + `zap') as an extension. + + To work around these problems, which may cause bugs in shell + scripts, set the `LC_COLLATE' and `LC_CTYPE' environment variables + to `C'. + + ---------- Footnotes ---------- + + (1) which is the actual "bug" that prompted the change in behavior + + +File: sed.info, Node: Extended regexps, Next: Concept Index, Prev: Reporting Bugs, Up: Top + +Appendix A Extended regular expressions +*************************************** + +The only difference between basic and extended regular expressions is in +the behavior of a few characters: `?', `+', parentheses, and braces +(`{}'). While basic regular expressions require these to be escaped if +you want them to behave as special characters, when using extended +regular expressions you must escape them if you want them _to match a +literal character_. + +Examples: +`abc?' + becomes `abc\?' when using extended regular expressions. It + matches the literal string `abc?'. + +`c\+' + becomes `c+' when using extended regular expressions. It matches + one or more `c's. + +`a\{3,\}' + becomes `a{3,}' when using extended regular expressions. It + matches three or more `a's. + +`\(abc\)\{2,3\}' + becomes `(abc){2,3}' when using extended regular expressions. It + matches either `abcabc' or `abcabcabc'. + +`\(abc*\)\1' + becomes `(abc*)\1' when using extended regular expressions. + Backreferences must still be escaped when using extended regular + expressions. + + +File: sed.info, Node: Concept Index, Next: Command and Option Index, Prev: Extended regexps, Up: Top + +Concept Index +************* + +This is a general index of all issues discussed in this manual, with the +exception of the `sed' commands and command-line options. + + +* Menu: + +* 0 address: Reporting Bugs. (line 103) +* Additional reading about sed: Other Resources. (line 6) +* ADDR1,+N: Addresses. (line 78) +* ADDR1,~N: Addresses. (line 78) +* Address, as a regular expression: Addresses. (line 27) +* Address, last line: Addresses. (line 22) +* Address, numeric: Addresses. (line 8) +* Addresses, in sed scripts: Addresses. (line 6) +* Append hold space to pattern space: Other Commands. (line 125) +* Append next input line to pattern space: Other Commands. (line 105) +* Append pattern space to hold space: Other Commands. (line 117) +* Appending text after a line: Other Commands. (line 27) +* Backreferences, in regular expressions: The "s" Command. (line 19) +* Branch to a label, if s/// failed: Extended Commands. (line 63) +* Branch to a label, if s/// succeeded: Programming Commands. + (line 22) +* Branch to a label, unconditionally: Programming Commands. + (line 18) +* Buffer spaces, pattern and hold: Execution Cycle. (line 6) +* Bugs, reporting: Reporting Bugs. (line 6) +* Case-insensitive matching: The "s" Command. (line 94) +* Caveat -- #n on first line: Common Commands. (line 20) +* Command groups: Common Commands. (line 50) +* Comments, in scripts: Common Commands. (line 12) +* Conditional branch <1>: Extended Commands. (line 63) +* Conditional branch: Programming Commands. + (line 22) +* Copy hold space into pattern space: Other Commands. (line 121) +* Copy pattern space into hold space: Other Commands. (line 113) +* Delete first line from pattern space: Other Commands. (line 99) +* Disabling autoprint, from command line: Invoking sed. (line 34) +* empty regular expression: Addresses. (line 31) +* Emptying pattern space <1>: Reporting Bugs. (line 130) +* Emptying pattern space: Extended Commands. (line 85) +* Evaluate Bourne-shell commands: Extended Commands. (line 12) +* Evaluate Bourne-shell commands, after substitution: The "s" Command. + (line 85) +* Exchange hold space with pattern space: Other Commands. (line 129) +* Excluding lines: Addresses. (line 101) +* Extended regular expressions, choosing: Invoking sed. (line 113) +* Extended regular expressions, syntax: Extended regexps. (line 6) +* Files to be processed as input: Invoking sed. (line 141) +* Flow of control in scripts: Programming Commands. + (line 11) +* Global substitution: The "s" Command. (line 51) +* GNU extensions, /dev/stderr file <1>: Other Commands. (line 88) +* GNU extensions, /dev/stderr file: The "s" Command. (line 78) +* GNU extensions, /dev/stdin file <1>: Extended Commands. (line 53) +* GNU extensions, /dev/stdin file: Other Commands. (line 78) +* GNU extensions, /dev/stdout file <1>: Other Commands. (line 88) +* GNU extensions, /dev/stdout file <2>: The "s" Command. (line 78) +* GNU extensions, /dev/stdout file: Invoking sed. (line 149) +* GNU extensions, 0 address <1>: Reporting Bugs. (line 103) +* GNU extensions, 0 address: Addresses. (line 78) +* GNU extensions, 0,ADDR2 addressing: Addresses. (line 78) +* GNU extensions, ADDR1,+N addressing: Addresses. (line 78) +* GNU extensions, ADDR1,~N addressing: Addresses. (line 78) +* GNU extensions, branch if s/// failed: Extended Commands. (line 63) +* GNU extensions, case modifiers in s commands: The "s" Command. + (line 23) +* GNU extensions, checking for their presence: Extended Commands. + (line 69) +* GNU extensions, disabling: Invoking sed. (line 81) +* GNU extensions, emptying pattern space <1>: Reporting Bugs. (line 130) +* GNU extensions, emptying pattern space: Extended Commands. (line 85) +* GNU extensions, evaluating Bourne-shell commands <1>: Extended Commands. + (line 12) +* GNU extensions, evaluating Bourne-shell commands: The "s" Command. + (line 85) +* GNU extensions, extended regular expressions: Invoking sed. (line 113) +* GNU extensions, g and NUMBER modifier interaction in s command: The "s" Command. + (line 57) +* GNU extensions, I modifier <1>: The "s" Command. (line 94) +* GNU extensions, I modifier: Addresses. (line 49) +* GNU extensions, in-place editing <1>: Reporting Bugs. (line 85) +* GNU extensions, in-place editing: Invoking sed. (line 51) +* GNU extensions, L command: Extended Commands. (line 26) +* GNU extensions, M modifier: The "s" Command. (line 99) +* GNU extensions, modifiers and the empty regular expression: Addresses. + (line 31) +* GNU extensions, N~M addresses: Addresses. (line 13) +* GNU extensions, quitting silently: Extended Commands. (line 36) +* GNU extensions, R command: Extended Commands. (line 53) +* GNU extensions, reading a file a line at a time: Extended Commands. + (line 53) +* GNU extensions, reformatting paragraphs: Extended Commands. (line 26) +* GNU extensions, returning an exit code <1>: Extended Commands. + (line 36) +* GNU extensions, returning an exit code: Common Commands. (line 30) +* GNU extensions, setting line length: Other Commands. (line 65) +* GNU extensions, special escapes <1>: Reporting Bugs. (line 78) +* GNU extensions, special escapes: Escapes. (line 6) +* GNU extensions, special two-address forms: Addresses. (line 78) +* GNU extensions, subprocesses <1>: Extended Commands. (line 12) +* GNU extensions, subprocesses: The "s" Command. (line 85) +* GNU extensions, to basic regular expressions <1>: Reporting Bugs. + (line 51) +* GNU extensions, to basic regular expressions: Regular Expressions. + (line 26) +* GNU extensions, two addresses supported by most commands: Other Commands. + (line 25) +* GNU extensions, unlimited line length: Limitations. (line 6) +* GNU extensions, writing first line to a file: Extended Commands. + (line 80) +* Goto, in scripts: Programming Commands. + (line 18) +* Greedy regular expression matching: Regular Expressions. (line 143) +* Grouping commands: Common Commands. (line 50) +* Hold space, appending from pattern space: Other Commands. (line 117) +* Hold space, appending to pattern space: Other Commands. (line 125) +* Hold space, copy into pattern space: Other Commands. (line 121) +* Hold space, copying pattern space into: Other Commands. (line 113) +* Hold space, definition: Execution Cycle. (line 6) +* Hold space, exchange with pattern space: Other Commands. (line 129) +* In-place editing: Reporting Bugs. (line 85) +* In-place editing, activating: Invoking sed. (line 51) +* In-place editing, Perl-style backup file names: Invoking sed. + (line 62) +* Inserting text before a line: Other Commands. (line 46) +* Labels, in scripts: Programming Commands. + (line 14) +* Last line, selecting: Addresses. (line 22) +* Line length, setting <1>: Other Commands. (line 65) +* Line length, setting: Invoking sed. (line 76) +* Line number, printing: Other Commands. (line 62) +* Line selection: Addresses. (line 6) +* Line, selecting by number: Addresses. (line 8) +* Line, selecting by regular expression match: Addresses. (line 27) +* Line, selecting last: Addresses. (line 22) +* List pattern space: Other Commands. (line 65) +* Mixing g and NUMBER modifiers in the s command: The "s" Command. + (line 57) +* Next input line, append to pattern space: Other Commands. (line 105) +* Next input line, replace pattern space with: Common Commands. + (line 44) +* Non-bugs, 0 address: Reporting Bugs. (line 103) +* Non-bugs, in-place editing: Reporting Bugs. (line 85) +* Non-bugs, localization-related: Reporting Bugs. (line 112) +* Non-bugs, N command on the last line: Reporting Bugs. (line 31) +* Non-bugs, regex syntax clashes: Reporting Bugs. (line 51) +* Parenthesized substrings: The "s" Command. (line 19) +* Pattern space, definition: Execution Cycle. (line 6) +* Perl-style regular expressions, multiline: Addresses. (line 54) +* Portability, comments: Common Commands. (line 15) +* Portability, line length limitations: Limitations. (line 6) +* Portability, N command on the last line: Reporting Bugs. (line 31) +* POSIXLY_CORRECT behavior, bracket expressions: Regular Expressions. + (line 105) +* POSIXLY_CORRECT behavior, enabling: Invoking sed. (line 84) +* POSIXLY_CORRECT behavior, escapes: Escapes. (line 11) +* POSIXLY_CORRECT behavior, N command: Reporting Bugs. (line 46) +* Print first line from pattern space: Other Commands. (line 110) +* Printing line number: Other Commands. (line 62) +* Printing text unambiguously: Other Commands. (line 65) +* Quitting <1>: Extended Commands. (line 36) +* Quitting: Common Commands. (line 30) +* Range of lines: Addresses. (line 65) +* Range with start address of zero: Addresses. (line 78) +* Read next input line: Common Commands. (line 44) +* Read text from a file <1>: Extended Commands. (line 53) +* Read text from a file: Other Commands. (line 78) +* Reformat pattern space: Extended Commands. (line 26) +* Reformatting paragraphs: Extended Commands. (line 26) +* Replace hold space with copy of pattern space: Other Commands. + (line 113) +* Replace pattern space with copy of hold space: Other Commands. + (line 121) +* Replacing all text matching regexp in a line: The "s" Command. + (line 51) +* Replacing only Nth match of regexp in a line: The "s" Command. + (line 55) +* Replacing selected lines with other text: Other Commands. (line 52) +* Requiring GNU sed: Extended Commands. (line 69) +* Script structure: sed Programs. (line 6) +* Script, from a file: Invoking sed. (line 46) +* Script, from command line: Invoking sed. (line 41) +* sed program structure: sed Programs. (line 6) +* Selecting lines to process: Addresses. (line 6) +* Selecting non-matching lines: Addresses. (line 101) +* Several lines, selecting: Addresses. (line 65) +* Slash character, in regular expressions: Addresses. (line 41) +* Spaces, pattern and hold: Execution Cycle. (line 6) +* Special addressing forms: Addresses. (line 78) +* Standard input, processing as input: Invoking sed. (line 143) +* Stream editor: Introduction. (line 6) +* Subprocesses <1>: Extended Commands. (line 12) +* Subprocesses: The "s" Command. (line 85) +* Substitution of text, options: The "s" Command. (line 47) +* Text, appending: Other Commands. (line 27) +* Text, deleting: Common Commands. (line 36) +* Text, insertion: Other Commands. (line 46) +* Text, printing: Common Commands. (line 39) +* Text, printing after substitution: The "s" Command. (line 65) +* Text, writing to a file after substitution: The "s" Command. + (line 78) +* Transliteration: Other Commands. (line 14) +* Unbuffered I/O, choosing: Invoking sed. (line 131) +* Usage summary, printing: Invoking sed. (line 28) +* Version, printing: Invoking sed. (line 24) +* Working on separate files: Invoking sed. (line 121) +* Write first line to a file: Extended Commands. (line 80) +* Write to a file: Other Commands. (line 88) +* Zero, as range start address: Addresses. (line 78) + + +File: sed.info, Node: Command and Option Index, Prev: Concept Index, Up: Top + +Command and Option Index +************************ + +This is an alphabetical list of all `sed' commands and command-line +options. + + +* Menu: + +* # (comments): Common Commands. (line 12) +* --binary: Invoking sed. (line 93) +* --expression: Invoking sed. (line 41) +* --file: Invoking sed. (line 46) +* --follow-symlinks: Invoking sed. (line 104) +* --help: Invoking sed. (line 28) +* --in-place: Invoking sed. (line 51) +* --line-length: Invoking sed. (line 76) +* --quiet: Invoking sed. (line 34) +* --regexp-extended: Invoking sed. (line 113) +* --silent: Invoking sed. (line 34) +* --unbuffered: Invoking sed. (line 131) +* --version: Invoking sed. (line 24) +* -b: Invoking sed. (line 93) +* -e: Invoking sed. (line 41) +* -f: Invoking sed. (line 46) +* -i: Invoking sed. (line 51) +* -l: Invoking sed. (line 76) +* -n: Invoking sed. (line 34) +* -n, forcing from within a script: Common Commands. (line 20) +* -r: Invoking sed. (line 113) +* -u: Invoking sed. (line 131) +* : (label) command: Programming Commands. + (line 14) +* = (print line number) command: Other Commands. (line 62) +* a (append text lines) command: Other Commands. (line 27) +* b (branch) command: Programming Commands. + (line 18) +* c (change to text lines) command: Other Commands. (line 52) +* D (delete first line) command: Other Commands. (line 99) +* d (delete) command: Common Commands. (line 36) +* e (evaluate) command: Extended Commands. (line 12) +* G (appending Get) command: Other Commands. (line 125) +* g (get) command: Other Commands. (line 121) +* H (append Hold) command: Other Commands. (line 117) +* h (hold) command: Other Commands. (line 113) +* i (insert text lines) command: Other Commands. (line 46) +* L (fLow paragraphs) command: Extended Commands. (line 26) +* l (list unambiguously) command: Other Commands. (line 65) +* N (append Next line) command: Other Commands. (line 105) +* n (next-line) command: Common Commands. (line 44) +* P (print first line) command: Other Commands. (line 110) +* p (print) command: Common Commands. (line 39) +* q (quit) command: Common Commands. (line 30) +* Q (silent Quit) command: Extended Commands. (line 36) +* r (read file) command: Other Commands. (line 78) +* R (read line) command: Extended Commands. (line 53) +* s command, option flags: The "s" Command. (line 47) +* T (test and branch if failed) command: Extended Commands. (line 63) +* t (test and branch if successful) command: Programming Commands. + (line 22) +* v (version) command: Extended Commands. (line 69) +* w (write file) command: Other Commands. (line 88) +* W (write first line) command: Extended Commands. (line 80) +* x (eXchange) command: Other Commands. (line 129) +* y (transliterate) command: Other Commands. (line 14) +* z (Zap) command: Extended Commands. (line 85) +* {} command grouping: Common Commands. (line 50) + + + +Tag Table: +Node: Top944 +Node: Introduction3867 +Node: Invoking sed4421 +Ref: Invoking sed-Footnote-110512 +Ref: Invoking sed-Footnote-210704 +Node: sed Programs10803 +Node: Execution Cycle11951 +Ref: Execution Cycle-Footnote-113129 +Node: Addresses13430 +Node: Regular Expressions18174 +Node: Common Commands26082 +Node: The "s" Command28085 +Ref: The "s" Command-Footnote-132422 +Node: Other Commands32494 +Ref: Other Commands-Footnote-137636 +Node: Programming Commands37708 +Node: Extended Commands38622 +Node: Escapes42630 +Ref: Escapes-Footnote-145641 +Node: Examples45832 +Node: Centering lines46928 +Node: Increment a number47820 +Ref: Increment a number-Footnote-149380 +Node: Rename files to lower case49500 +Node: Print bash environment52203 +Node: Reverse chars of lines52958 +Ref: Reverse chars of lines-Footnote-153959 +Node: tac54176 +Node: cat -n54943 +Node: cat -b56765 +Node: wc -c57512 +Ref: wc -c-Footnote-159420 +Node: wc -w59489 +Node: wc -l60953 +Node: head61197 +Node: tail61528 +Node: uniq63209 +Node: uniq -d63997 +Node: uniq -u64708 +Node: cat -s65419 +Node: Limitations67270 +Node: Other Resources68111 +Node: Reporting Bugs68956 +Ref: Reporting Bugs-Footnote-176092 +Node: Extended regexps76163 +Node: Concept Index77349 +Node: Command and Option Index92298 + +End Tag Table |