Adds Arch Linux dotfiles

6 files changed, 368 insertions, 0 deletions

diff --git a/hypr/hypridle.conf b/hypr/hypridle.conf
new file mode 100644
index 000000000..66db8c34f
--- /dev/null
+++ b/hypr/hypridle.conf
@@ -0,0 +1,11 @@
+listener {
+    timeout = 300                           # 5min
+    on-timeout = hyprlock                   # command to run when timeout has passed
+    on-resume = notify-send "Welcome back!" # command to run when activity is detected after timeout has fired.
+}
+
+listener {
+    timeout = 900                           # 15min
+    on-timeout = hyprctl dispatch dpms off  # command to run when timeout has passed
+    on-resume = hyprctl dispatch dpms on    # command to run when activity is detected after timeout has fired.
+}
\ No newline at end of file
diff --git a/hypr/hyprland.conf b/hypr/hyprland.conf
new file mode 100644
index 000000000..d1682014b
--- /dev/null
+++ b/hypr/hyprland.conf
@@ -0,0 +1,265 @@
+
+# #######################################################################################
+# AUTOGENERATED HYPR CONFIG.
+# PLEASE USE THE CONFIG PROVIDED IN THE GIT REPO /examples/hypr.conf AND EDIT IT,
+# OR EDIT THIS ONE ACCORDING TO THE WIKI INSTRUCTIONS.
+# #######################################################################################
+
+autogenerated = 0 # remove this line to remove the warning
+
+# This is an example Hyprland config file.
+# Refer to the wiki for more information.
+# https://wiki.hyprland.org/Configuring/Configuring-Hyprland/
+
+# Please note not all available settings / options are set here.
+# For a full list, see the wiki
+
+# You can split this configuration into multiple files
+# Create your files separately and then link them to this file like this:
+# source = ~/.config/hypr/myColors.conf
+
+
+################
+### MONITORS ###
+################
+
+# See https://wiki.hyprland.org/Configuring/Monitors/
+monitor=,preferred,auto,auto
+
+
+###################
+### MY PROGRAMS ###
+###################
+
+# See https://wiki.hyprland.org/Configuring/Keywords/
+
+# Set programs that you use
+$terminal = foot
+$fileManager = thunar
+$menu = rofi -show drun
+
+
+#################
+### AUTOSTART ###
+#################
+
+# Autostart necessary processes (like notifications daemons, status bars, etc.)
+# Or execute your favorite apps at launch like this:
+
+# exec-once = $terminal
+# exec-once = nm-applet &
+exec-once = waybar
+exec-once = hyprpaper
+exec-once = hypridle
+
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+# See https://wiki.hyprland.org/Configuring/Environment-variables/
+
+env = XCURSOR_SIZE,24
+env = HYPRCURSOR_SIZE,24
+
+
+#####################
+### LOOK AND FEEL ###
+#####################
+
+# Refer to https://wiki.hyprland.org/Configuring/Variables/
+
+# https://wiki.hyprland.org/Configuring/Variables/#general
+general { 
+    gaps_in = 5
+    gaps_out = 20
+
+    border_size = 2
+
+    # https://wiki.hyprland.org/Configuring/Variables/#variable-types for info about colors
+    col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
+    col.inactive_border = rgba(595959aa)
+
+    # Set to true enable resizing windows by clicking and dragging on borders and gaps
+    resize_on_border = false 
+
+    # Please see https://wiki.hyprland.org/Configuring/Tearing/ before you turn this on
+    allow_tearing = false
+
+    layout = dwindle
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#decoration
+decoration {
+    rounding = 10
+
+    # Change transparency of focused and unfocused windows
+    active_opacity = 1.0
+    inactive_opacity = 1.0
+
+    drop_shadow = true
+    shadow_range = 4
+    shadow_render_power = 3
+    col.shadow = rgba(1a1a1aee)
+
+    # https://wiki.hyprland.org/Configuring/Variables/#blur
+    blur {
+        enabled = true
+        size = 3
+        passes = 1
+        
+        vibrancy = 0.1696
+    }
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#animations
+animations {
+    enabled = true
+
+    # Default animations, see https://wiki.hyprland.org/Configuring/Animations/ for more
+
+    bezier = myBezier, 0.05, 0.9, 0.1, 1.05
+
+    animation = windows, 1, 7, myBezier
+    animation = windowsOut, 1, 7, default, popin 80%
+    animation = border, 1, 10, default
+    animation = borderangle, 1, 8, default
+    animation = fade, 1, 7, default
+    animation = workspaces, 1, 6, default
+}
+
+# See https://wiki.hyprland.org/Configuring/Dwindle-Layout/ for more
+dwindle {
+    pseudotile = true # Master switch for pseudotiling. Enabling is bound to mainMod + P in the keybinds section below
+    preserve_split = true # You probably want this
+}
+
+# See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
+master {
+    new_is_master = true
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#misc
+misc { 
+    force_default_wallpaper = -1 # Set to 0 or 1 to disable the anime mascot wallpapers
+    disable_hyprland_logo = false # If true disables the random hyprland logo / anime girl background. :(
+}
+
+
+#############
+### INPUT ###
+#############
+
+# https://wiki.hyprland.org/Configuring/Variables/#input
+input {
+    kb_layout = us
+    kb_variant =
+    kb_model =
+    kb_options =
+    kb_rules =
+
+    follow_mouse = 1
+
+    sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
+
+    touchpad {
+        natural_scroll = false
+    }
+}
+
+# https://wiki.hyprland.org/Configuring/Variables/#gestures
+gestures {
+    workspace_swipe = false
+}
+
+# Example per-device config
+# See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
+device {
+    name = epic-mouse-v1
+    sensitivity = -0.5
+}
+
+
+####################
+### KEYBINDINGSS ###
+####################
+
+# See https://wiki.hyprland.org/Configuring/Keywords/
+$mainMod = SUPER # Sets "Windows" key as main modifier
+
+# Example binds, see https://wiki.hyprland.org/Configuring/Binds/ for more
+bind = $mainMod, RETURN, exec, $terminal
+bind = $mainMod, C, killactive,
+bind = $mainMod, M, exec, wlogout
+bind = $mainMod, E, exec, $fileManager
+bind = $mainMod, V, togglefloating,
+bind = $mainMod, D, exec, $menu
+bind = $mainMod, P, pseudo, # dwindle
+bind = $mainMod, J, togglesplit, # dwindle
+bind = $mainMod,F,fullscreen
+
+# Move focus with mainMod + arrow keys
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+
+# Switch workspaces with mainMod + [0-9]
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+
+# Move active window to a workspace with mainMod + SHIFT + [0-9]
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+
+# Example special workspace (scratchpad)
+bind = $mainMod, S, togglespecialworkspace, magic
+bind = $mainMod SHIFT, S, movetoworkspace, special:magic
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+
+
+#POWER
+bind = $mainMod, L, exec,~/Documents/scripts/lock.sh
+
+
+##############################
+### WINDOWS AND WORKSPACES ###
+##############################
+
+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+
+# Example windowrule v1
+# windowrule = float, ^(kitty)$
+
+# Example windowrule v2
+# windowrulev2 = float,class:^(kitty)$,title:^(kitty)$
+
+windowrulev2 = suppressevent maximize, class:.* # You'll probably like this.
+windowrule = float,^(blueman-manager)$
+windowrule = float,^(qalculate-gtk)$
+windowrulev2 = float,title:^(Volume Control)$
+#windowrulev2 = noblur,class:^(google-chrome-stable)$
+windowrulev2=noblur,class:^()$,title:^()$
\ No newline at end of file
diff --git a/hypr/hyprlock.conf b/hypr/hyprlock.conf
new file mode 100644
index 000000000..0978158eb
--- /dev/null
+++ b/hypr/hyprlock.conf
@@ -0,0 +1,86 @@
+
+# BACKGROUND
+background {
+    monitor =
+    path = ~/Pictures/wallhaven-l8vp7y_1920x1080.png
+    # blur_passes = 0.3
+    contrast = 0.8916
+    brightness = 0.8172
+    vibrancy = 0.1696
+    vibrancy_darkness = 0.0
+
+}
+
+input-field {
+  monitor =
+    size = 200, 50
+    outline_thickness = 3
+    dots_size = 0.33 # Scale of input-field height, 0.2 - 0.8
+    dots_spacing = 0.15 # Scale of dots' absolute size, 0.0 - 1.0
+    dots_center = true
+    dots_rounding = -1 # -1 default circle, -2 follow input-field rounding
+    outer_color = rgb(151515)
+    inner_color = rgb(FFFFFF)
+    font_color = rgb(10, 10, 10)
+    fade_on_empty = true
+    fade_timeout = 1000 # Milliseconds before fade_on_empty is triggered.
+    placeholder_text = <i>Input Password...</i> # Text rendered in the input box when it's empty.
+    hide_input = false
+    rounding = -1 # -1 means complete rounding (circle/oval)
+    check_color = rgb(204, 136, 34)
+    fail_color = rgb(204, 34, 34) # if authentication failed, changes outer_color and fail message color
+    fail_text = <i>$FAIL <b>($ATTEMPTS)</b></i> # can be set to empty
+    fail_transition = 300 # transition time in ms between normal outer_color and fail_color
+    capslock_color = -1
+    numlock_color = -1
+    bothlock_color = -1 # when both locks are active. -1 means don't change outer color (same for above)
+    invert_numlock = false # change color if numlock is off
+    swap_font_color = false # see below
+    position = 0, -120
+    halign = center
+    valign = center
+
+}
+
+
+# TIME
+label {
+    monitor =
+    text = cmd[update:1000] echo "$(date +"%-I:%M%p")"
+    color = $foreground
+    #color = rgba(255, 255, 255, 0.6)
+    font_size = 120
+    font_family = EnvyCodeR Nerd Font
+    position = 0, 0
+    halign = center
+    valign = top
+}
+
+# USER
+label {
+    monitor =
+    text = $USER
+    color = $foreground
+    #color = rgba(255, 255, 255, 0.6)
+    font_size = 25
+    font_family = EnvyCodeR Nerd Font
+    position = 0, -40
+    halign = center
+    valign = center
+    shadow_passes = 5
+    shadow_size = 10
+}
+
+# image {
+#     path = ~/Pictures/wallhaven-l8vp7y_1920x1080.png
+#     size = 280 # lesser side if not 1:1 ratio
+#     rounding = -1 # negative values mean circle
+#     border_size = 4
+#     border_color = rgb(221, 221, 221)
+#     rotate = 0 # degrees, counter-clockwise
+#     reload_time = -1 # seconds between reloading, 0 to reload with SIGUSR2
+# #    reload_cmd =  # command to get new path. if empty, old path will be used. don't run "follow" commands like tail -F
+#     position = 0, 150
+#     halign = center
+#     valign = center
+# }
\ No newline at end of file
diff --git a/hypr/hyprpaper.conf b/hypr/hyprpaper.conf
new file mode 100644
index 000000000..b4b339ad0
--- /dev/null
+++ b/hypr/hyprpaper.conf
@@ -0,0 +1,4 @@
+preload = /home/indrajith/Pictures/wallhaven-l8vp7y_1920x1080.png
+
+wallpaper = ,/home/indrajith/Pictures/wallhaven-l8vp7y_1920x1080.png
+splash = true
diff --git a/hypr/scripts/browser.sh b/hypr/scripts/browser.sh
new file mode 100755
index 000000000..63036c43d
--- /dev/null
+++ b/hypr/scripts/browser.sh
@@ -0,0 +1 @@
+google-chrome-stable
\ No newline at end of file
diff --git a/hypr/scripts/filemanager.sh b/hypr/scripts/filemanager.sh
new file mode 100755
index 000000000..af8fd0e44
--- /dev/null
+++ b/hypr/scripts/filemanager.sh
@@ -0,0 +1 @@
+thunar
\ No newline at end of file